GALLETTO 1260

[gadroulll]

i have galletto from china and i can read only 32kb memory of every car.any help?

[Robby&Bobby]

what cars did you try?

32kb @ 100 read or stops the ecu when reading?

[gadroulll]

i try to read a bmw 1.9 memory 29f200 and a saxo vts 1.4 with same memory. i read 32kb i load a another memory and it does not work ..only reads 32kb.it says that 100% and reads only 32kb.

[ahadi]

HELLO,,


Looking for setup file for this application . THx

[chiper]

it only reads the fuel map area on a lot of cars as this is the area that needs modifying when remaping.

[gezame]

i try to read a bmw 1.9 memory 29f200 and a saxo vts 1.4 with same memory. i read 32kb i load a another memory and it does not work ..only reads 32kb.it says that 100% and reads only 32kb.

Hi,
Yes,
you find other types of ECU, which only makes partial reading galletto file (zone maps).
With this reading you have everything you need to make a good modification.
Regards.

[gadroulll]

what program you suggest to modify this part zone of fuel map?
ecm2001 can not read parts of memory.

[gezame]

Hi,
Winols.
Regards.

[gadroulll]

i read file with winols i found two maps that looks with injection and spark maps . winols found my ecu checksum sagem 2000. it say that have to correct checksum its this ok?

[TheDSI]

galletto can't read the whole file on sagem ECU .
it only read the part with data but it's ok all the nedded data are there, modify with winOLS and refalsh the ECU works

[gadroulll]

thanks to all i will test it ..

[Robby&Bobby]

32kb readout is worthless... what about programm 1,2 and 3 in vag cars? making power or programm switching possible. if you can not read out a full map how can you make a good tuning?

that ecm is not reading your 32kb file is a good thing believe me...

we had old galletto clone running on version 1080 software. reading and writing full files. so it is possible. I think it is more the chinese build quality and replica knowledge...

[TheDSI]

32kb readout is worthless... what about programm 1,2 and 3 in vag cars? making power or programm switching possible. if you can not read out a full map how can you make a good tuning?

that ecm is not reading your 32kb file is a good thing believe me...

we had old galletto clone running on version 1080 software. reading and writing full files. so it is possible. I think it is more the chinese build quality and replica knowledge...

I don't think even an official galletto can read whole file of these ECU .
but ok in many other it can read whole file but it's prety useless untill data part of the file is the only that you need to modify or you want to do something else than just impoving the preformance of your engine .
soft 1, 2 and 3 are in the data part of the whole file in vag ECU .

[z786]

anybody have eobd 1250 soft with crack n drivers? (not 1260 plz)

[Persia]

hi
how i can read flash or eeprom for Peugeot 206 Sagem S2000 PL4 FC5 ?
what pins must be connected to galletto? K-Line or L-Line and + - ?

http://up.iranblog.com/37261/1265898400.jpg

[z786]

anybody have eobd 1250 soft with crack n drivers? (not 1260 plz)
must be someone here, anybody?

[br.balazs]

use this pin:
Sagem_-_S2000.JPG (87 KB) let?lt?se (http://data.hu/get/3920127/Sagem_-_S2000.JPG)
SAGEM_S2000_RPMT.JPG (84 KB) let?lt?se (http://data.hu/get/3920128/SAGEM_S2000_RPMT.JPG)

i hope when you can read,but i cant read...