Virgin/Parziale Alfa Romeo GT 1.9-Bosch EDC16 CF3-0281011511-1037372048

[redtop]

I've tried making this EEPROM dump virgin with EcuVonix tool but no success.
Can anyone please help me out making this file virgin? Thnx!

[jolidj]

your file virgine, maybe after start need to coding injector.

[redtop]

your file virgine, maybe after start need to coding injector.

Thank you jolidj (http://www.digital-kaos.co.uk/forums/member.php/130237-jolidj) but that's exactly the same file as EcuVonix gives me, and it doesn't work. Also tried Volta without success.

This is report from AlfaOBD. Programmed = not virgin

___________________________
Tested device: Injection Diesel Bosch EDC16 CF3/EOBD (eng. 1.9/2.4)
___________________


2017-08-20 20:25:09
DEVICE INFO:
Fiat drawing number: 55198809
Hardware number: 0281011511
Hardware version: 00
Software number: 1037372048
Software version: 6D44
Homologation number: 94741
ISO code: FD86A4837F
Programming date: 06/07/2004
______________________
Engine startup: Not allowed
Injection control unit: Programmed
Universal code: Not enabled
Odometer, km: 8080,9
Number of overrevs: 2
Max engine speed counter, msec: 840
Max RPM reached: 6320

[kiszka]

...............

[redtop]

Cleaned up inbox. Please resend PW!

[redtop]

Thank you kiszka (http://www.digital-kaos.co.uk/forums/member.php/69387-kiszka) for the file, but still no success.
:thumpdown:

2017-09-02 17:09:34
DEVICE INFO:
Fiat drawing number: 55198809
Hardware number: 0281011511
Hardware version: 00
Software number: 1037372048
Software version: 6D44
Homologation number: 94741
ISO code: FD86000000
Programming date: 00/00/0000
______________________
Engine startup: Not allowed
Injection control unit: Programmed
Universal code: Not enabled
Odometer, km: 0,0
Number of overrevs: 0
Max engine speed counter, msec: 0
Max RPM reached: 0
Odometer at last rewrite: 0,0 km

[kiszka]

...............

[kiszka]

...............

[redtop]

test file virgin

Getting errors unpacking the file. Is it a new password?

[redtop]

Here are the error codes, but it is from ECU on bench. Car is 500km away.

2017-09-05 17:58:52
Faults found.
P0190
P0480
P0404
P0045
P0235
P0090
P0115
P0180
P1213
P0481
___________________
Error code: P0190
Fuel high pressure sensor
Error code: P0480
Fan relay 1
Error code: P0404
Exhaust Gas Recirculation (EGR)
Error code: P0045
Turbo actuator
Error code: P0235
Boost pressure sensor
Error code: P0090
High pressure regulator valve
Error code: P0115
Water temperature sensor
Error code: P0180
Diesel temperature sensor
Error code: P1213
Air temperature sensor (inside turbo)
Error code: P0481
Cooling Fan relay 2

[kiszka]

...............

[redtop]

give readout, eeprom after diagnosis
There must be errors on the bench
I thought all the attempts you made in the car

If course there are errors on the bench. Cannot read BDM in car ;)

Here are EEPROM read after diagnosis. PW same as your file.

[redtop]

test file virgin

Sorry, no luck! :(

Here is full log from AlfaOBD:

Tested device: Injection Diesel Bosch EDC16 CF3/EOBD (eng. 1.9/2.4)
___________________


2017-09-11 19:52:40
DEVICE INFO:
Fiat drawing number: 55198809
Hardware number: 0281011511
Hardware version: 00
Software number: 1037372048
Software version: 6D44
Homologation number: 94741
ISO code: FD86A4837F
Programming date: 06/07/2004
______________________
Engine startup: Not allowed
Injection control unit: Programmed
Universal code: Not enabled
Odometer, km: 0,0
Number of overrevs: 0
Max engine speed counter, msec: 0
Max RPM reached: 0
Odometer at last rewrite: 0,0 km
Battery voltage: 11,59315
Preheating control unit: Off
Fuel pump relay: Off
Conditioner enable request: Off
Conditioner relay control: Off
Pressure switch (trinary): Not active
Pressure switch (quadrinary): Not active
Diesel pump: Not active
Fan 2 (if present): Active
Diesel filter heating relay: Not active
Synchronization status: Revs/timing wait
Brake pedal status: Released
Brake contact 2: Pressed
Clutch pedal: Pressed
Oil pressure: OK
Oil pressure warning lamp: On
Water in fuel filter lamp: Off
Water temperature warning lamp: Off
Cruise control status: Awaiting adjustment
Irreversible cruise error status: Excessive deceleration
Air control inhibit: Cold start
Over boost adjustment inhibit: Active at 75%
Cylinder 1 Injector Code: AAAAAAAAA
Cylinder 2 Injector Code: AAAAAAAAA
Cylinder 3 Injector Code: AAAAAAAAA
Cylinder 4 Injector Code: AAAAAAAAA
Cruise switch: Off
Set Cruise acceleration(+): Not requested
Set Cruise deceleration(-): Not requested
Cruise restore button(RCL): Released
Atmospheric pressure: 1008
______________________

[kiszka]

...............

[redtop]

Kiszka, I don't follow what you mean. Injector codes are for compensation for variations in capacity of the injectors. It can, and should be changed with a diagnostic tool if you change the injectors. Virgin is if the ECU is married to the immobilizer or not. These are two completly different things.

AlfaOBD has reported virgin (not programmed) / not vigin (programmed) correctly for all other ECUs I made virgin: M2.10.4, M2.10.3, ME3.1, ME7.3.1. I have no reason to belive that this isn't correct for the EDC16C8