View Full Version : 2008 Opel Combo 1.3 cdti problem
delectric
23rd August, 2017, 02:00 PM
Hi,
I'm having problems with this Marelli ecu trying to remove Dpf.
I have read it trough Obd without problem. But when i have tried to write it, about 50% of writing it stops and give me error.
I have opened the ecu and writed it trough BDM, no problem to write the stock file i have read trough OBD but when i have tried it on the car no communication too.
What could be wrong??
Many thanks.
Best regards.
levisdj
23rd August, 2017, 02:35 PM
What tool are you using? and did you write the OBD readed file via BDM?
delectric
23rd August, 2017, 06:54 PM
I used Galleto.
Here is the reading I could do with it.
Many thanks.
levisdj
24th August, 2017, 06:07 AM
If you flashed the ODB readed file via BDM you will need BDM readed flash .... because OBD read is not complete like BDM read!
delectric
24th August, 2017, 07:35 AM
And where can i find the correct file?
This is the ecu.
Many thanks.
Best regards.
levisdj
24th August, 2017, 12:56 PM
Hi, try this!
delectric
24th August, 2017, 09:07 PM
Hi, try this!
Sorry but i can't open the file. It looks like to be damaged.
Thanks.
levisdj
25th August, 2017, 08:42 AM
Upgrate to latest winrar!
delectric
5th September, 2017, 11:45 PM
Hi, try this!
Hi, finally i could try this file and it works. I think the eprom i read was corrupt. My problem now is the immo.
Could you send me this file with immo off?
Many thanks.
Best regards.
delectric
6th September, 2017, 02:09 PM
Here is the eprom i could read after trying to write ecu. I think it's corrupted. With it no communication with car. Whit other ecu eprom car communicates but immo comes in.
Many thanks.
Best regards.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.