PDA

View Full Version : 1.9TDI AFN Stage 2



bisete
25th August, 2017, 12:02 PM
Hi, This is Luis, newie in the forum.
I wonder if someone could help me with my 1.9 tdi AFN 110 swaped in a vw t3 westfalia (2.5 ton). I have installed 0.216 injectors, and a hybrid turbo vnt 17/20. Any one with a stage 2 bin giving torque as low revs as possible. Final gold is not 210hp, but ok with 180-200hp :tears_of_joy:. The gold is torque at 1800-2000 rpms
thanks in advance

fzhut
25th August, 2017, 12:17 PM
190-200ps with ori pump 10 and 0.216 is impossible. You could reach about 160ps max. Additionally, over 300 Nm of torque in range 1500-2000 rpm will cause vibrations and destroy DMF.

bisete
1st September, 2017, 06:53 PM
Hi fzhut, thanks for the reply!
OK i'll search for a 11mm pump, however I allready have a 12 mm hybrid pump. may be that's to much pump?
No worries with DMF I installed a single mass long time ago.

Ivailo
2nd September, 2017, 02:38 PM
With the single mass is even worse you will distroy first the bearings on the main shaft of the transsmission and then everything else in it.

bisete
4th September, 2017, 10:30 AM
So, I should forget about high torque at low revs, even if a replace the pump for a 11mm? what would be save for the transmission? thanks a lot