PDA

View Full Version : Citroen Xsara 2001 BSI & ECU PIN/MILEAGE



DaniXDX
25th August, 2017, 09:52 PM
Hello!

I have enclosed the copy of the bsi and ecu of two different cars.
In both cars the mileage is 638.325 KM. The dash is set to 0 Km.


If I am not mistaken the PIN of the BSI (CAR 1) is: 8QXX (VIN ended in 8911)
If I am not mistaken the PIN of the BSI (CAR 2) is: 9SNF (VIN ended in 6488)

Are good?


I need the mileage of the BSI (CAR 1) in 192,000 km, I know the sequence is in:


0010: xx xx xx xx xx xx 00 A0 86 01 xx xx xx xx xx
0040: 00 A0 86 01 xx xx xx xx xx xx xx xx xx xx xx
0150: xx xx xx xx xx xx xx xx xx xx xx xx 00 A0 86 01
Where the next bytes:
00 A0 86 01 - is a mileage


But I do not know how to put the 192,000 kms. :)


On the other hand I can not get the PIN of the ECU in any car. Are the readings of both eproms corrupted? Is there mileage on the ECU?


I also include ECU flash and IMMO OFF (working).


My intention is to make the immo working, but I do not have Lexia ... Just autocom.


Thank you very much.

kiszka
25th August, 2017, 09:56 PM
...............

kiszka
25th August, 2017, 11:11 PM
...............

DaniXDX
25th August, 2017, 11:13 PM
Hello, I had read the eprom with the MiPro, not good.


Here de eprom readed with carprog ... are they okay? The mileage is good.


Thank you very much!

kiszka
25th August, 2017, 11:17 PM
...............

DaniXDX
25th August, 2017, 11:22 PM
Thank you man! I appreciate the help! I've cleaned the messages.

DaniXDX
25th August, 2017, 11:25 PM
Here the dash dumps reads, with the "original" mileage and 0 KM, tested and working.

kiszka
25th August, 2017, 11:36 PM
...............

DaniXDX
25th August, 2017, 11:42 PM
BSI are in 0 KM, and dash in 190.000 KM, right? Thanks.