View Full Version : Siemens SID 803 read Problem
mexanico1971
30th August, 2017, 06:31 PM
Hi Guys
I have try to read SID803 , width FGT3 , Ktag and Xprog !
But not luck
I only have the adapters that came width the tools , and I have try width wires solder in PCB
I fead ECU +12v in the connector
Any idea what is wrong ?!
thank"s in advance
carmageddon
30th August, 2017, 09:26 PM
sid 803 ford, sid 206 ford, sid 803a volvo
http://i57.servimg.com/u/f57/16/13/31/66/bdm210.gif
https://s26.postimg.org/4obp8yeid/SID_206_ford.jpg (https://postimg.org/image/4obp8yeid/)
https://s26.postimg.org/fcfg7sohh/SID_803_ford.jpg (https://postimg.org/image/fcfg7sohh/)
https://s26.postimg.org/xt9uym4fp/SID_803_A_volvo.jpg (https://postimg.org/image/xt9uym4fp/)
smirnoff_rules
30th August, 2017, 10:49 PM
anyone tried this sid adapter on me9.7 l hear they work aswell
mexanico1971
31st August, 2017, 06:21 PM
sid 803 ford, sid 206 ford, sid 803a volvo
http://i57.servimg.com/u/f57/16/13/31/66/bdm210.gif
https://s26.postimg.org/4obp8yeid/SID_206_ford.jpg (https://postimg.org/image/4obp8yeid/)
https://s26.postimg.org/fcfg7sohh/SID_803_ford.jpg (https://postimg.org/image/fcfg7sohh/)
https://s26.postimg.org/xt9uym4fp/SID_803_A_volvo.jpg (https://postimg.org/image/xt9uym4fp/)k
Hi Thank"s
Is this FGT3
What tool is it ?!
Brs
carmageddon
31st August, 2017, 07:04 PM
Fgtech v53
mexanico1971
31st August, 2017, 09:07 PM
anyone tried this sid adapter on me9.7 l hear they work aswell
I never have one of does here to read
Brs
mexanico1971
1st September, 2017, 01:00 AM
Fgtech v53
Do you have made modifications on it ?
today I update HW relays but no luck in the ECU
Brs
carmageddon
1st September, 2017, 06:10 AM
obviously full updated, SW, FW and HW, as i studied myself for it!
mexanico1971
7th September, 2017, 12:26 PM
HI
Now ECU not work in the car !
How to recover Mpc555 if the Tools not identify the ECU ?!
mexanico1971
15th September, 2017, 12:53 AM
HI
Today I got New used ECU , and read at 1st time
Put ecu in the car and the car starts
I swap eepron fron de old ecu, and got the same DTC that I have before
P2408,Fuel Filler Cap Signal fault
P1351,
P1579 Cooling circuit degassing electrovalve ,EGR related I Think
P1597 Cooling circuit by-pass electrovalve
CAR got New EGR
But I think can be eeprom data from old ECU that is bad !
Any Ideia , is possible to put ecu Virgin ?!
Thank"s in advance
carmageddon
15th September, 2017, 06:15 AM
you need to write e2p and flash from old ecu to new ecu, not only e2p
mexanico1971
15th September, 2017, 11:46 AM
you need to write e2p and flash from old ecu to new ecu, not only e2p
But the car Start and Run !
BRS
mexanico1971
15th September, 2017, 01:08 PM
HI
Today I got New used ECU , and read at 1st time
Put ecu in the car and the car starts
I swap eepron fron de old ecu, and got the same DTC that I have before
P2408,Fuel Filler Cap Signal fault
P1351,
P1579 Cooling circuit degassing electrovalve ,EGR related I Think
P1597 Cooling circuit by-pass electrovalve
CAR got New EGR
But I think can be eeprom data from old ECU that is bad !
Any Ideia , is possible to put ecu Virgin ?!
Thank"s in advance
Can some one delete that DTC"s and correct CKS ,
Please
johak
15th September, 2017, 01:31 PM
Can some one delete that DTC"s and correct CKS ,
Please
here is your dtc off
ktag correct the checksum well
mexanico1971
15th September, 2017, 08:26 PM
here is your dtc off
ktag correct the checksum well
thank"s friend for your help
I manage to delete dtc and use Ktag to flash MPC , all run good
I was afraid because it was the only ECU I have and it was expensive !
All that help me my appreciate
Case solved
Brs
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.