PDA

View Full Version : Siemens SID 803 read Problem



mexanico1971
30th August, 2017, 06:31 PM
Hi Guys
I have try to read SID803 , width FGT3 , Ktag and Xprog !
But not luck
I only have the adapters that came width the tools , and I have try width wires solder in PCB
I fead ECU +12v in the connector

Any idea what is wrong ?!

thank"s in advance

carmageddon
30th August, 2017, 09:26 PM
sid 803 ford, sid 206 ford, sid 803a volvo

http://i57.servimg.com/u/f57/16/13/31/66/bdm210.gif

https://s26.postimg.org/4obp8yeid/SID_206_ford.jpg (https://postimg.org/image/4obp8yeid/)


https://s26.postimg.org/fcfg7sohh/SID_803_ford.jpg (https://postimg.org/image/fcfg7sohh/)


https://s26.postimg.org/xt9uym4fp/SID_803_A_volvo.jpg (https://postimg.org/image/xt9uym4fp/)

smirnoff_rules
30th August, 2017, 10:49 PM
anyone tried this sid adapter on me9.7 l hear they work aswell

mexanico1971
31st August, 2017, 06:21 PM
sid 803 ford, sid 206 ford, sid 803a volvo

http://i57.servimg.com/u/f57/16/13/31/66/bdm210.gif

https://s26.postimg.org/4obp8yeid/SID_206_ford.jpg (https://postimg.org/image/4obp8yeid/)


https://s26.postimg.org/fcfg7sohh/SID_803_ford.jpg (https://postimg.org/image/fcfg7sohh/)


https://s26.postimg.org/xt9uym4fp/SID_803_A_volvo.jpg (https://postimg.org/image/xt9uym4fp/)k




Hi Thank"s
Is this FGT3
What tool is it ?!

Brs

carmageddon
31st August, 2017, 07:04 PM
Fgtech v53

mexanico1971
31st August, 2017, 09:07 PM
anyone tried this sid adapter on me9.7 l hear they work aswell

I never have one of does here to read

Brs

mexanico1971
1st September, 2017, 01:00 AM
Fgtech v53

Do you have made modifications on it ?
today I update HW relays but no luck in the ECU

Brs

carmageddon
1st September, 2017, 06:10 AM
obviously full updated, SW, FW and HW, as i studied myself for it!

mexanico1971
7th September, 2017, 12:26 PM
HI
Now ECU not work in the car !
How to recover Mpc555 if the Tools not identify the ECU ?!

mexanico1971
15th September, 2017, 12:53 AM
HI
Today I got New used ECU , and read at 1st time
Put ecu in the car and the car starts
I swap eepron fron de old ecu, and got the same DTC that I have before

P2408,Fuel Filler Cap Signal fault
P1351,
P1579 Cooling circuit degassing electrovalve ,EGR related I Think
P1597 Cooling circuit by-pass electrovalve

CAR got New EGR

But I think can be eeprom data from old ECU that is bad !

Any Ideia , is possible to put ecu Virgin ?!

Thank"s in advance

carmageddon
15th September, 2017, 06:15 AM
you need to write e2p and flash from old ecu to new ecu, not only e2p

mexanico1971
15th September, 2017, 11:46 AM
you need to write e2p and flash from old ecu to new ecu, not only e2p

But the car Start and Run !

BRS

mexanico1971
15th September, 2017, 01:08 PM
HI
Today I got New used ECU , and read at 1st time
Put ecu in the car and the car starts
I swap eepron fron de old ecu, and got the same DTC that I have before

P2408,Fuel Filler Cap Signal fault
P1351,
P1579 Cooling circuit degassing electrovalve ,EGR related I Think
P1597 Cooling circuit by-pass electrovalve

CAR got New EGR

But I think can be eeprom data from old ECU that is bad !

Any Ideia , is possible to put ecu Virgin ?!

Thank"s in advance

Can some one delete that DTC"s and correct CKS ,
Please

johak
15th September, 2017, 01:31 PM
Can some one delete that DTC"s and correct CKS ,
Please

here is your dtc off
ktag correct the checksum well

mexanico1971
15th September, 2017, 08:26 PM
here is your dtc off
ktag correct the checksum well


thank"s friend for your help
I manage to delete dtc and use Ktag to flash MPC , all run good
I was afraid because it was the only ECU I have and it was expensive !
All that help me my appreciate
Case solved

Brs