fadhle
31st August, 2017, 10:45 AM
Hello my friends,
I have Diahatsu terios 2002 with 4C key transponder,
It has a problem it crank for long time after that start ok,
I check the problem why late to start i get no signal(triger)from ECU to igniters and injectors,
I scan the car and i get two codes:
P1530 Emergancy Halt switch
P1601 EEPROM Erorr_injector correction value,DPNR thermal degradation record.
when erase all codes and turn Ignition off then start the car it is start ok. but if you let it off for some minuites it is return back to crank and no start
also the code is take place again.
can any one help me, regards.
I have Diahatsu terios 2002 with 4C key transponder,
It has a problem it crank for long time after that start ok,
I check the problem why late to start i get no signal(triger)from ECU to igniters and injectors,
I scan the car and i get two codes:
P1530 Emergancy Halt switch
P1601 EEPROM Erorr_injector correction value,DPNR thermal degradation record.
when erase all codes and turn Ignition off then start the car it is start ok. but if you let it off for some minuites it is return back to crank and no start
also the code is take place again.
can any one help me, regards.