View Full Version : Opel Dab45 code enquiry
emes125
1st September, 2017, 06:49 PM
Hi,
I downloaded dump from DAB45, and I am almost sure security code is 6678. Am I right ?
shooting
1st September, 2017, 07:02 PM
Hi,
I downloaded dump from DAB45, and I am almost sure security code is 6678. Am I right ?
Code is 6678
wbr
emes125
1st September, 2017, 07:07 PM
Thank you.
I downloaded dump from 24C64 from Opel CD70 NAVI - SIEMENS VDO. I am afraid, there is a problem with file - I see no VIN, which normally is visible in content. Can ypu tell me if file is fine, and what security code is in ?
shooting
1st September, 2017, 07:10 PM
Thank you.
I downloaded dump from 24C64 from Opel CD70 NAVI - SIEMENS VDO. I am afraid, there is a problem with file - I see no VIN, which normally is visible in content. Can ypu tell me if file is fine, and what security code is in ?
Pin is 9616
wbr
emes125
28th September, 2017, 10:37 PM
9616 was fine. Can you help me with DIS (GID) aswell ?
shooting
28th September, 2017, 11:41 PM
9616 was fine. Can you help me with DIS (GID) aswell ?
Your pin is 9366
wbr
plasma533
29th September, 2017, 10:24 AM
Thank you.
I downloaded dump from 24C64 from Opel CD70 NAVI - SIEMENS VDO. I am afraid, there is a problem with file - I see no VIN, which normally is visible in content. Can ypu tell me if file is fine, and what security code is in ?
There is no vin stored on cd70's but a serial number instead
emes125
29th September, 2017, 07:57 PM
Thanks for code. I checked if i read it properly, because I cannot reset this GID using TECH-2. I tried, but it told me "deactivation failed". Even "deactivation without radio"
I cannot program EHU using this code, because then I get message "already programmed". EHU is now in delivery state.
What am I doing wrong ?
shooting
30th September, 2017, 12:46 AM
Thanks for code. I checked if i read it properly, because I cannot reset this GID using TECH-2. I tried, but it told me "deactivation failed". Even "deactivation without radio"
I cannot program EHU using this code, because then I get message "already programmed". EHU is now in delivery state.
What am I doing wrong ?Try disconnecting the battery for 5~10 minutes then reconnect and try again
wbr
emes125
3rd October, 2017, 08:23 AM
Try disconnecting the battery for 5~10 minutes then reconnect and try again
wbr
Didn't help. VIN is ok in all modules (BCM, ECU, DIS). Still I have a message "Deactivation not successful, ID N.O.K. yet". I tried to use dump from other GID, but result is the same.
Can you tell me security code for this CD30 ?
shooting
3rd October, 2017, 09:36 AM
Didn't help. VIN is ok in all modules (BCM, ECU, DIS). Still I have a message "Deactivation not successful, ID N.O.K. yet". I tried to use dump from other GID, but result is the same.
Can you tell me security code for this CD30 ?
Pin is 1468 but you will need display pin not radio pin
wbr
emes125
3rd October, 2017, 09:37 AM
I used dump from this forum, which I posted in 2007 (with pin 0062)
KierAn20
3rd October, 2017, 10:21 AM
So which radio are you trying to program to this GID buddy? The CD70 or the CD30mp3? And which dump is now in the GID?
emes125
3rd October, 2017, 12:22 PM
Now I just want to have GID in delivery state (divorced). Radio I already have (in delivery state). GID contains now dump from this thread:
http://www.digital-kaos.co.uk/forums/showthread.php/270223-Opel-Meriva-GID-security-code?highlight=0062
emes125
16th October, 2017, 08:46 AM
I found divorced GID dump. It works. Problem solved
emes125
7th April, 2018, 11:29 PM
Can you tell me security code for CD70 ?
tvzmaj
8th April, 2018, 02:36 AM
Your eeprom does not have GM data.
I think, wrong eeprom. Read lower eeprom from base
emes125
12th April, 2018, 08:38 PM
Ok, I taken from second section, 8 and 16 bit
shooting
12th April, 2018, 09:26 PM
Ok, I taken from second section, 8 and 16 bit
Use 4673
wbr
emes125
16th April, 2018, 08:18 AM
Works. Thank you
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.