PDA

View Full Version : DAIHATSU MOVE 2005 MILEAGE ADJUSTMENT



VitzonFire
6th September, 2017, 07:35 PM
move 2015 model chasis LA 150
CPU: MB91F058 FUJITSU

CAN someone please adjust Mileage to 13500KM,
i have attached work flash, code flash

Thanks.

nikz
7th September, 2017, 06:49 AM
here is your file

VitzonFire
7th September, 2017, 10:43 AM
hi mate, i wrote the file , but when i powered on the instrument cluster, the reading was the original one, and not 13500km, please advise
here is your file

nikz
7th September, 2017, 11:13 AM
1. There is no mileage in the dump 014855 km
2. probably badly recorded
3. Record again and read right away.

VitzonFire
7th September, 2017, 11:17 AM
wow, you are right, the current reading is 14855KM, but when i write your file under "code flash", it does not work, it stays at 14855km.

1. There is no mileage in the dump 014855 km
2. probably badly recorded
3. Record again and read right away.

nikz
7th September, 2017, 11:22 AM
read the dump again and download it here

VitzonFire
7th September, 2017, 11:23 AM
you need "code flash" or "work Flash"

read the dump again and download it here

nikz
7th September, 2017, 11:27 AM
work Flash.................

VitzonFire
7th September, 2017, 11:30 AM
oops, i was writing your file inside "code flash mode" do you think that can be an issue?

work Flash.................

nikz
7th September, 2017, 11:37 AM
my file is <work Flash>

VitzonFire
7th September, 2017, 11:42 AM
i wrote your "work flash" file in the "code flash area" , maybe that is an error you think?

my file is <work Flash>

nikz
7th September, 2017, 11:48 AM
yes this error...................

VitzonFire
7th September, 2017, 12:03 PM
OK, so i restored work flash and code flash files to the original ones, tested the cluster it gave 14855KM,
then i wrote your 13500km file this time inside the "work flash" section, it says "file does not match device buffer" i press continue,anyway, then after writing, i power up the cluster, it says 00km.

please advise

yes this error...................

VitzonFire
7th September, 2017, 12:09 PM
HERE IS THE WORK FLASH:

nikz
7th September, 2017, 12:16 PM
<it says "file does not match device buffer">

what are you doing wrong

VitzonFire
7th September, 2017, 12:19 PM
PLEASE CHECK I SENT YOU A NEW WORK FLASH after reading

<it says "file does not match device buffer">

what are you doing wrong

nikz
7th September, 2017, 12:42 PM
NEW WORK FLASH=OLD WORK FLASH

VitzonFire
7th September, 2017, 07:21 PM
thanks its working now!!

NEW WORK FLASH=OLD WORK FLASH