Ducato MJD8F3 dpf 2012. 2.3JTD

[stevan]

Hello,several days ago i have done DPF off with Swiftec and car get power but also lot of black smoke in acceleration.
Turbo pressure goes all up to 2150 mBar.
Injectors looks ok in correction on Idle.
Does anyone have info is Swiftec do ok mjdF3?
I know year-two ago was not ok solution by swiftec.
I upload org if someone need and edited, read full MPC with IO terminal.

[waldi1979]

This is working solution (1 year).
You can compare.
If you need oil life reset, you need write ori.

[mario38]

Hello,several days ago i have done DPF off with Swiftec and car get power but also lot of black smoke in acceleration.
Turbo pressure goes all up to 2150 mBar.
Injectors looks ok in correction on Idle.
Does anyone have info is Swiftec do ok mjdF3?
I know year-two ago was not ok solution by swiftec.
I upload org if someone need and edited, read full MPC with IO terminal.

your file can work .. you disconnected differential pressure sensor and temperature sensor? if this is done and if any errors are present you can delete it ...

[stevan]

I have try with and witouth sensors today,same smoke.
Probably some problem is or injectors or intake air.
As i know on travel cars usually turbo must make overboost for 1-2 sec and than lover pressure,but here i get max 2150mB on target 2200mB,so no overboost.
In fact pressure not rise fast as shuld be.