Astra-H_2008y_1.7cdti_125HP_Denso need DPF+egr_off

[cubica1]

Hi friends,

can somebody clean from ori file DPF+EGR ?
Read by mpps v18 via OBD2.
Thanks in advance,
cuby

[seattm2012]

before writing chek cheksum

[cubica1]

Many thanks bro, still have no pass, this is DPR remover solution? I have that, now I'm gonna try within ESS method, and will post results. Till this moment I have prepaired the car before writing new file, in the sense: unplug all connectors (egr, dpf), reeprogram dash (w/o dpf), reset dpf via diagnostic to 0% ...

Currently, I'm in problem, mpps v18 (clone, of course) CAN read via obd2 but CAN't write?? (nothing's happen, write progress is 0%) I have tried to start mpps like run as administrator and still no success...I have sure information that mpps v18 R/W via obd this computer...Denso Y17ZDTR...but not in my case..why? somebody knows?

regards,
cuby

[cubica1]

I have just tested....can't write even on the bench on CAN, also. Reading is possible, but writing is still 0%.....brrggljjaeergghhh!!!!!
cuby

[smirnoff_rules]

l take it you cant even write original back? if not your need to try another tool , l believe mpps 18 has no problem on these

[cubica1]

I think, I'm close to solve problem..mpps can write file but only if not calculate cks..if I want to calculate...than mpps stop all. It is about vb c++ support or something similar..something is missing into operational system..
easy to solve if I know to calculate cks handly...but I do not know..
cuby

[cubica1]

dammn mpps...I didn't solve mpps problem, but thanks to an great friend from Romania, problem is solved by external cs calculation. Solved..
rgds,
cuby