PDA

View Full Version : mitsubishi center fuso 3.0 dtc off P0101



boberek5
16th September, 2017, 07:24 PM
A colleague or someone would help me to turn off this error. I have a problem with this car such an error can not be removed even on the engine off Exchange replacement for the second installation checked twice as if the computer was damaged I swapped nothing changed The second driver can not get The administrator has stated on the site is a crashed driver and they can replace it for the second after the regeneration and how old will be the discount but the price of the cosmos could be log off these dtc autko walks normally and the parameters sees the signal from the flowmeter

chipdanix
16th September, 2017, 07:49 PM
Your file test and report

474083

boberek5
16th September, 2017, 08:25 PM
Tomorrow I will test it again

boberek5
18th September, 2017, 09:41 AM
chipdanix chip error P0101 still has this eeprom error but you can remove it

byuri
3rd October, 2017, 06:35 AM
http://www.digital-kaos.co.uk/forums/showthread.php/618136-imm-canter-fuso?highlight=fuso

hi chipdanix
i need immo off ,mitsubishi center fuso 3.0

grygry
13th April, 2019, 08:09 AM
Hi all
i have got same issue, any solution ?

pike
13th April, 2019, 11:33 AM
Hi.
Upload your file.

grygry
13th April, 2019, 08:46 PM
Hi.
Upload your file.

File attached

thanks in advance

pike
15th April, 2019, 10:49 AM
DTC P0101 off

grygry
16th April, 2019, 09:51 AM
unfortunately i havegot still P0101

grygry
16th April, 2019, 09:59 AM
is there anyone who can solve this issue as professional?

Babos
16th April, 2019, 12:47 PM
I can write me in PM.