Wiremonkey
18th September, 2017, 03:08 PM
Hi All,
I need some help.
long story short a fellow locksmith was asked to program a new key to the touareg and has some how managed to delete all the keys out of it he was using MVP Pro.
he has asked me to see if i can sort it as he live miles away from where the car is.
i went out this morning to try and re program the keys using genuine VCDS he had the pin which was accepted by the controller, but it will not adapt the original key.
I have had to force the ign on by shorting 3 fuses in the fuse box. when i do this the put the key into the ign i get an IMMO Active message on the dash.
The kessy is siemens
tools i have are ZED_FUL, VCDS, MVP-PRO, AD-900, XPROG and an OSCA.
Any help greatly appreciated.
Thanks,
Phil
I need some help.
long story short a fellow locksmith was asked to program a new key to the touareg and has some how managed to delete all the keys out of it he was using MVP Pro.
he has asked me to see if i can sort it as he live miles away from where the car is.
i went out this morning to try and re program the keys using genuine VCDS he had the pin which was accepted by the controller, but it will not adapt the original key.
I have had to force the ign on by shorting 3 fuses in the fuse box. when i do this the put the key into the ign i get an IMMO Active message on the dash.
The kessy is siemens
tools i have are ZED_FUL, VCDS, MVP-PRO, AD-900, XPROG and an OSCA.
Any help greatly appreciated.
Thanks,
Phil