Vag Tacho 2.2-2.5-2.6-3.1 dump files

[k4talin]

Anyone can help users to repair Vag Tacho cables killed by using higher version of software please post here.
The only solution I have is to repair 2.5 cable by downgrading to 2.2... wich is a bit unacceptable.
Attachment here contains solution to repair your cable.

[datapage]

Use mprog 2.8
Program with file VagTahoUsb22.ept

Then run VTU-2XX-UA.exe
Removing and Replacing the usb.
Ready.
Perfect
:celticparty:

[dasboard3]

hi friend
please upload rapid or mega thank you


Anyone can help users to repair Vag Tacho cables killed by using higher version of software please post here.
The only solution I have is to repair 2.5 cable by downgrading to 2.2... wich is a bit unacceptable.
Attachment here contains solution to repair your cable.

[mavi]

Use mprog 2.8
Program with file VagTahoUsb22.ept

Then run VTU-2XX-UA.exe
Removing and Replacing the usb.
Ready.
Perfect
:celticparty:

Hello

here i can found vtu-2xx-ua.exe

Regards

Mavi
:top::top:

[mikeslocks]

Does any one have soft to 3.01 china clone been looking for a while now. Pm if you post going throught chemo right now only get my weekends and feel like doing nothing but watching the telly.:beer:

[vitek]

very efficient!!! (http://dict.leo.org/ende?lp=ende&p=Ci4HO3kMAA&search=efficient&trestr=0x8004)
the ID was blank....
Thanks

[jpt29]

interface not found

[sherrytse2010]

Can anybody tell me how to upate the vag tacho 1.4 to 2.2 or 2.5 with mprog ?:damnmate:

[elservis]

k4talin please reupload becose file is corrupted and cant be extraced

[max4ever]

C4talin - Please reuploaded in .rar format...Please,please,please...because my vagtacho v.2.2 China wrote "Connecting VDO New...
Unsupported Command!"

[gryzzly]

Anyone can help users to repair Vag Tacho cables killed by using higher version of software please post here.
The only solution I have is to repair 2.5 cable by downgrading to 2.2... wich is a bit unacceptable.
Attachment here contains solution to repair your cable.


hi friend
please upload rapid or mega thank you

[agury]

i've upped on rapid:
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/399311535/vagtacho_2.2_update.zip.html)

[max4ever]

After i've used K4talin's software, it seese the interface but I have the same error :
"USB to K-line Interface Connected!
Try to Connect Kombiinstrument at 9600 bps
Unsupported Command!
Try to Connect Kombiinstrument at 10400 bps
Unsupported Command!"

Please help me!!!!!

[fabian]

Anyone can help users to repair Vag Tacho cables killed by using higher version of software please post here.
The only solution I have is to repair 2.5 cable by downgrading to 2.2... wich is a bit unacceptable.
Attachment here contains solution to repair your cable.


Thank you so much, I upgrade my old vagtacho no problem!!!..

[bingo_]

I have the same problem than max4ever.
I repaired my 2.5 cable with the software.
Vag Tacho 2.5 seem to be OK (interface found ID ....).
But I can't read any Dash.
-> Unsupported Command .......!
-> connect with "any Tacho" is an endless loop trying each Bout rate.

Please help! ****ing Vag Tacho 3.5 destroyed my cable!

[asmn]

Can anybody tell me how to upate the vag tacho 1.7 to 2.2 or 2.5 with mprog

[azazell]

i think...
with mprog 3.5 (its free)
Program with file VagTahoUsb2.2.ept
after that u must run VTU-2XX-UA.exe
and remove and umplug the usb in pc..and its done

[stefan]

Can anybody tell me how to upate the vag tacho 1.7 to 2.2 or 2.5 with mprog

Only with MPROG is impossible. It is necessary to reprogram ATMEGA8, also.

[stonedagain]

Only with MPROG is impossible. It is necessary to reprogram ATMEGA8, also.
Can the cable be re-programmed via USB, or is an interface required?

[toms4]

Can the cable be re-programmed via USB, or is an interface required?
For Atmega8 you can use Ponyprog and paralel or serial interface.

[mardude]

I tried to read ATMEGA8 with parallel interface and serial and USB and UPA could not

[raematazz]

Can mprog 3.5 be used with other interfaces

[toms4]

I tried to read ATMEGA8 with parallel interface and serial and USB and UPA could not
Chip is programmed with lockbits, that is whay we asks dumps in forum.

[mardude]

Chip is programmed with lockbits, that is whay we asks dumps in forum.

Need lockbits for read atmega?

[stefan]

Need lockbits for read atmega?

If the MPU ATMEGA8 is locked, you can not read it, only erase and after that re-program it.

[xoom]

Can mprog 3.5 be used with other interfaces
MProg3.5 or FT_Prog(new) can be used with all interfaces based on FTDI chips.. (FT232BM/BL need external eeprom.. so without eeprom mprog is useless) :)

[max4ever]

Vagtacho 2.2 is reparable? Version 2.5 destroyed my cable!

[mardude]

Vagtacho 2.2 is reparable? Version 2.5 destroyed my cable!

Yes! Works fine!Solutions in DK.

[max4ever]

Where? I find but, no results!

[mardude]

Where? I find but, no results!
This repair your vagtacho.

[alfy]

This repair your vagtacho.

I used this and now the PC don't recognise the USB interface!
It demands new drivar, but not one driver works from FTDI. Searches for USB - K-line adapter driver.

Any solution for this?

[alfy]

I used this and now the PC don't recognise the USB interface!
It demands new drivar, but not one driver works from FTDI. Searches for USB - K-line adapter driver.

Any solution for this?


Solved with cange interface id in driver.

[sazimam]

Hi guyz,

maybe this will help you / a dump from well working VagTaxo 2.5:wavey:

[faza977]

Vag Taho-2.2 Opel Immo 2.0

[max4ever]

@mardude

Please attache file in rar format.

[Vaske]

Hello,

does vag tacho cable work with VAG K+CAN COMMANDER software? Thank you.

[cipijoint]

here is software and dump for vag tacho + opel immo , works with vag tacho , but for software 2.1 .
You will need to programm atmega8 inside interface and usb eeprom content

[cipijoint]

Hello,

does vag tacho cable work with VAG K+CAN COMMANDER software? Thank you.

no, will not work.

[albundy64]

Mine is death...3.01
I NEED damp for atmel8 & FT245RL...PLS !!!
HEEEP ME PLS !!!
...

[albundy64]

Does any one have soft to 3.01 china clone been looking for a while now. Pm if you post going throught chemo right now only get my weekends and feel like doing nothing but watching the telly.:beer:

Mine is death...3.01
I NEED damp for atmel8 & FT245RL...PLS !!!
HEEEP ME PLS !!!...

[albundy64]

Mine is death...3.01
I NEED damp for atmel8 & FT245RL (I have this oane RL =piece of shit )...PLS !!!
HEEELP ME PLS !!!...

[GenisX]

It seems that I bought an chinese copy of vagtacho 3.01... Now i tried to change the mileage of an immo3 tacho but it doesn't work. now i tried to use the 3.6 version of opelinfo.com an nothing happens. what can i do to get result ?

Thanks

sorry for the bad english !

[Pbuus]

Who can i upload the cabel

[eddy2010]

Hi have someone a dump of VAG Tacho Opel Immo 3.01. I need to repair cabel.

THX

[mardude]

Hi have someone a dump of VAG Tacho Opel Immo 3.01. I need to repair cabel.

THX

My Vag Tacho 3.01 had a problem, so I downgraded to version 2.5 and is working OK.

[furix]

I only get unsupported command. :(

[tatop]

CAN I use interface vag com 3.01 ????

[furix]

I can't get it to work with Mprog. Only FT_Prog, but ftprog doesn't load ept files. what do I do?
In Mprog i get the message FT_open - invalid handle.....

[furix]

Solved with cange interface id in driver.


HOW? Got the same problem.

[Brucegsm]

My cable was damaged and not detected any FTDI device. I replaced FTDI chip and everything works ok after adjustment mprog.

[sicacole07]

i need for dump vag-tacho v 3.01

[mishu_b]

Hi guyz,

maybe this will help you / a dump from well working VagTaxo 2.5:wavey:


Who can upload the dump for Atmega too?
it will be highly appreciate!!!

many thanks!

[mikeslocks]

The 3.01 are junk took 4 untill one worked and the case was boxxy.

[mishu_b]

...
still looking for a good 3.1 dump or higher

atb

[willobd]

Anyone can help users to repair Vag Tacho cables killed by using higher version of software please post here.
The only solution I have is to repair 2.5 cable by downgrading to 2.2... wich is a bit unacceptable.
Attachment here contains solution to repair your cable.
the newest version i know is 3.01...:marchmellow:

[Cordobe1]

Hello!
recently bought this cable:

VAG TACHO 3.01 + USB OPEL IMMO EEPROM | eBay (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270776551175&viewitem=&sspagename=STRK%3AMEWNX%3AIT#ht_3811wt_1165)

Anyone know what software you use?

TNKS A LOT!

[savioal]

Hi,
damp for atmel8 & FT245RL ept.





Mine is death...3.01
I NEED damp for atmel8 & FT245RL...PLS !!!
HEEEP ME PLS !!!...

[ninja123]

Hi guys,
I bought this cable about 2 years ago and never got it to work:(

I just fished it out to give it another try on a new laptop, but still the same- usb to k line interface not found.

I tried several different software versions, but still the same.

I see a few posts up that someone had this prob and changed id???? how??? where??

Thanks for any help guys,

happy new year

ninja

[miha99]

You can`t use different softwares, only version which comes together with interface (china clone).

[1 6 D]

3,01 from last site don't work in my VAGTacho, ATMega dump is interrupted or something.

[alin 151]

..........................

[dorcky]

Your dump from atmega is useless !

Do you look at this dump after you extracted?
If not, take a look now :)

P.S. The atmega uC in general has security bits fused... :( so it is a little bit hard to extract info from them...

Regards!

[mardude]

Here is the Software & dump for ft245rl and atmega8
ept, fuses and hex
if this help, press THANKS BUTTON:wink:
Virus w32.injector.cym!

[alin 151]

....................

[alin 151]

..........................

[dorcky]

@alin 151
Man, as I told you before, your dump is not good!
Don`t post`it anymore!

[alin 151]

..........................

[alin 151]

After long searching and testing, this is the kit for VagTacho 3.01 FT245RL
:goodpost:

1. Write ATMEGA8 with the vagt2.6Flash and vagt2.6eeprom files
2. Set Fuses
3. With Mprog rewrite FT245RL
4. Install the drivers
5. Run VTacho serum-CD715B710A.exe

Works with vagtacho 3.01 and all previous versions!!!
Good luck everyone!

Don`t forget to THANKS!

:manuscarf:

[zohans]

will try to fix mine. Thanks alin!

I can confirm that it works fine! One more time thank you alin!

[Galee]

Don't know if I have the same issue I have a vag tacho 2.5 cable but had to reformat my hard drive and can not find the cd that came with it.
I have not used any newer version software with it. So downloaded the 2.5 software pluged the usb cable in. The computer reconised it when pluged in but when I open vag tacho 2.5 it says interface not found please see attached software and mprog dump.

http://i236.photobucket.com/albums/ff41/elloboss/88C48E04-C1CE-4249-95A3-B08BD1F45242-11033-00000BDDAB7E200E_zps44917d97.jpg

http://i236.photobucket.com/albums/ff41/elloboss/CF2C26C3-EA03-482B-BCBC-FE52AFE0BCFD-11033-00000BDDA4C4C697_zps8e665b06.jpg

Will I need to reflash the cable or do I have the wrong drivers?

[i0gerald]

Solved with cange interface id in driver.

Do you mind, to inform me how to change Device Instance Id in the driver?

Thank you.

I am answering my own question: Do you mind, to inform me how to change Device Instance Id in the driver?>> Edit the driver ftd2xx.inf to reflect the PID

[silikon21]

Is the cable hw compatible with VCDS and vice versa? I have an VCDS clone 10.6 cable that was disabled via original update, I cannot downgrade it because of bad H/W revision (FT232RL, GAL). Is it possible to reprogramm ATMEGA with this dump, so i coul use it with Vag Tacho?

[silikon21]

look for *.inf files in installation folder and insert HW_ID and SW_ID pids from the control panels usb device properties

[alin 151]

..........................

[noppathon]

Hello
my Vag tacho 3.01 had a problem can not read opel zafiara 2.2 year 2002.can help me.

[Meat-Head]

can not read opel zafiara 2.2 year 2002.can help me.


Wrong car for a start, if immo2 nil poi

[garaje16]

holaaaaaa hay alguien de madrid

[garaje16]

nadieeeeeeeeeeeeeeeeeeeeee

[buljaka]

Don't know if I have the same issue I have a vag tacho 2.5 cable but had to reformat my hard drive and can not find the cd that came with it.
I have not used any newer version software with it. So downloaded the 2.5 software pluged the usb cable in. The computer reconised it when pluged in but when I open vag tacho 2.5 it says interface not found please see attached software and mprog dump.

http://i236.photobucket.com/albums/ff41/elloboss/88C48E04-C1CE-4249-95A3-B08BD1F45242-11033-00000BDDAB7E200E_zps44917d97.jpg

http://i236.photobucket.com/albums/ff41/elloboss/CF2C26C3-EA03-482B-BCBC-FE52AFE0BCFD-11033-00000BDDA4C4C697_zps8e665b06.jpg

Will I need to reflash the cable or do I have the wrong drivers?

excatly the same problem, anyone has a solution?

[ryshard]

I've got another problem. I've tried any versions od vag tacho dumps on my china vag tacho 3.01, and I have always, that Usb to K-line interface is connected ID:xxxxx, but when click on Connect Selected ECU got:
Warning: No 12 volts power supply from OBD connector!
Warning: K-Line Fault - Short circuit to Ground!
I even change the L9637D in interface, but still got no connection. Maybe anyone got the cd to this china cable ?

[dadal]

Use mprog 2.8
Program with file VagTahoUsb22.ept

Then run VTU-2XX-UA.exe
Removing and Replacing the usb.
Ready.
Perfect
http://www.digital-kaos.co.uk/forums/images/smilies/party22.gif
Hi mate thanks works perfect
:celticparty:

[mobilni]

How do you flash cable? is there any instruction on that?

[rui]

Hello. I have some doubts and I wish they could clarify and help at the same time. I have vag-tacho2.2 and can I use a version above?
I have a cable vag can comander 5.1 never got it by running, can you give it back?


thank you

[longgo]

Little old topic but safe my cable. So, here is what happen. I also bought from Ebay clone that claim to be 3.01. One time it start (to test it) and then it went dead..
I try to fix the FTD serial, but the software despite starting began to complain that "12V not present..." , "K-line short to the ground.." or similar..
Well, no connection to any VW - AUDI dash.. Damn.
Then I found that topic and in post #68 was some RAR pack that content FTD file, DATA and EEPROM memory HEX files.. And it bring it back to life...

What where my steps :
1 - open the cable, and found out that the green cable (data line) get broken right away.. So, I cut and re solder all of them

595057

2 - cut that line. Have no clue why pin 7 (K-line ) is connected to pin 3 (non universal) but for my range of use do not think will do something good to have K-line tight together with pin 3

595061

3 - move the Atmel to programmer

595062

That one is cheap , but work great..
As the Atmel was removed, I reflash the FTD chip

4 - select the Ft245RL.ept file using attached MProg

595063

select "EDIT" , and wrote the serial number, then using the blue flash logo , flash the cable. Then press READ to confirm I get the number inside:

595065

[longgo]

Because only 5 picture per answer, will write second post.. sorry

Next wrote data in the Atmel chip.

- select right chip info:

595067

- leave the fuses as is , and all data to be FF FF filled and push write. That manage to erase the chip

595068

- next select the proper files, and select the right destination:

595069

- set the FUSES and burn.

595070

Solder the chip on place and that 12V and K-line errors disappear, and the cable with 2.6 software flawlessly manage to read the pin code from TT N8 dash..

Thanks folks for the great forum and files!

p.s: bought 2 new ATMega 8A chips but manage to use that one what come with the cable. Anyway, perhaps better just to replace it with new and flash the software..

[garnierX]

ive tried quite few times. but un successful.
Many years ago I was using cable ( china vagtacho 3.01 from eBay.co.uk ) and I had a problem with it. I remember that I was messing about with it with mprog and somehow I have fixed it.

Now afer few years I wanted to read PIN from different car and cable is death again.
It might be the fact that I dont have winXP , but win10 x64.
however Ive tried even running XP in virtualbox. still no success.

then Ive found this site and i can hardly remember that I was "fixing" cable somehow like this in the past. ( with mprog ).

I highly appreciate any help that anyone provides. However I guess that there is plenty users like myself that don't know what to do at all and might need a bit more help with that,.


So can someone please sum up what the steps are to make that cable run again?

I'm pretty sure that last time when i did it ive only did something in mprog program and then problably had it running fine./..

some users writes there about some fuses etc... ? wt?? what fuses ? there is no such option in mprog at all or do i missing something?


I have windows 10 x64 and Vag Tacho cable 3.01
how can these two working together?


If it's necessary i can run it under windows xp in virtual box, but i prefer not to.


thank you very much for any help of info that will make it run again.

[Ingwar]

all the best! Does anyone have a cord dump of vag tahoe 5.0?

[CasaEd]

I know this thread is old, but I would just like to thank those people on here who took the time to upload fixes, I've finally managed to get my

VagTacho 3.01 cable working after owning it for 3 years. I don't know which fix brought it back to life and I have no intention of playing with the

cable to find out, it now works as it should, so thank you ! :jiggin::jiggin::jiggin::jiggin:

[aabron]

Hello,
Can i replace 93c46 with 93s46 in vag tacho ft245bm, change PID to D99 and serial with mprog and use atmega firmware from version ft245rl vagtacho 3.01?
What i don't understand is that on the schematic of vagtacho 1.0-1.7 on eeprom 93c46 pin 7 DC is pulled low and pin 6 ORG is pulled high.
On 93s47 pin 6 W would be pulled high all the time. Would it work?
Can v1 work up to v3 with 93s46?
Can someone post schematic of vagtacho 2.5 - 3.3?
I am writing about this post:
https://www.digital-kaos.co.uk/forums/showthread.php/52448-Vagtacho-3-30?p=348698&viewfull=1#post348698

[pjakub]

Little old topic but safe my cable. So, here is what happen. I also bought from Ebay clone that claim to be 3.01. One time it start (to test it) and then it went dead..
I try to fix the FTD serial, but the software despite starting began to complain that "12V not present..." , "K-line short to the ground.." or similar..
Well, no connection to any VW - AUDI dash.. Damn.
Then I found that topic and in post #68 was some RAR pack that content FTD file, DATA and EEPROM memory HEX files.. And it bring it back to life...

What where my steps :
1 - open the cable, and found out that the green cable (data line) get broken right away.. So, I cut and re solder all of them

595057

2 - cut that line. Have no clue why pin 7 (K-line ) is connected to pin 3 (non universal) but for my range of use do not think will do something good to have K-line tight together with pin 3

595061

3 - move the Atmel to programmer

595062

That one is cheap , but work great..
As the Atmel was removed, I reflash the FTD chip

4 - select the Ft245RL.ept file using attached MProg

595063

select "EDIT" , and wrote the serial number, then using the blue flash logo , flash the cable. Then press READ to confirm I get the number inside:

595065

Thanks a lot! I just did the procedure as described and revived my VAG TACHO 3.01!!!
Excellent Tutorial!

[RadioUser]

This is good information, thank you

[mexanico1971]

Hi , Any one have success to extract pin from opel immo 1 or 2 ?
thank"s in advance