Kawasaki Z1000

[Mezz_cro]

Hello

I have Kawasaki Z1000 2005 year with Denso ECU 21175-0097 with lost all keys. I have try with Tango to program keys but it doesnt work,I try first with CN2 Transponder and then with TPX2 Transponder, both transponder I program on key number 1(master?).

So could you help me about that ?

Thank you...

Bruno

[t7sebaa]

Wrong 4Pg.
Try 4B 48 49 43 50

Master key on 2pg have 0A slave 05

[Mezz_cro]

Wrong 4Pg.
Try 4B 48 49 43 50

Master key on 2pg have 0A slave 05

Thanks, Ill try...

[rokibar]

choise kawasaki denso 21175-0220 or kawasaki denso 21175-0356. should be good.

[weza247]

Hello

I have Kawasaki Z1000 2005 year with Denso ECU 21175-0097 with lost all keys. I have try with Tango to program keys but it doesnt work,I try first with CN2 Transponder and then with TPX2 Transponder, both transponder I program on key number 1(master?).

So could you help me about that ?

Thank you...

Bruno

Does it have an Atmel eeprom?

[Mezz_cro]

Does it have an Atmel eeprom?

Yes, ATMEL 93C66

[weza247]

Erase that eeprom couple of times before writing new file back. I had same problem on that same bike before

[Mezz_cro]

I have try everything and dont work... Some other idea?

[weza247]

I have try everything and dont work... Some other idea?

what eeprom programmer are you using to erase it.
it is for sure the atmel eeprom.
for example i erase chip with tl866 about 10 to 15 times then write file back then it takes.

you can code 4d60 chip cn2/5 tpx etc key will be written in but for some reason those atmel eeps are stubborn..

[weza247]

and code it at key-2 position

[Mezz_cro]

I have tryed with UPA and ORANGE to erase eeprom (yes ATMEL), and program 4d60 with TANGO...
I can try on key-2 position, that is my last hope...

[Mezz_cro]

I programed new eeprom and add key on position 2 and kawasaki starts! Thanks everybody on help

[drugowaz]

What do you mean new eeprom?
Tango dont need write dumps back to eeprom