2008 Dodge Nitro problem with skreem module

[peloncini]

Hi mates.
I have problems to get pin code from a skreem module of a dodge Nitro ,the module has no comm with any other module and not even with my scanner I opened and I looked for a memory to read but I only found a device with a number TJA1040 and I can't read with upa and minipro because they don't support it.
My question is what can I do to obtain that pincode ,I going to ask for a new skreem module and I won't be able to program it?
the truck doesn't start and all other modules have communication between them and with my scanner maxisys.
Could somebody advice me please.
is possible to obtain pincode from another module or from vin?

[brend]

Hi mates.
I have problems to get pin code from a skreem module of a dodge Nitro ,the module has no comm with any other module and not even with my scanner I opened and I looked for a memory to read but I only found a device with a number TJA1040 and I can't read with upa and minipro because they don't support it.
My question is what can I do to obtain that pincode ,I going to ask for a new skreem module and I won't be able to program it?
the truck doesn't start and all other modules have communication between them and with my scanner maxisys.
Could somebody advice me please.
is possible to obtain pincode from another module or from vin?


Hi.Put skim picture ,nr, skim insade picture.:)

[peloncini]

Hi thanks for your answer
here are the pictures from my skreem module

[rokibar]

check other side board. should be 24c16

[Bllinda]

TSSOP/MSOP.body

check other side board. should be 24c16

[peloncini]

Thanks everybody
you are right is a tiny memory I never mind ,I did open before the other side and did not note that memory.
here the dump if anybody know where is the pincode.

[Bllinda]

Only your time is expensive for you?

Thanks everybody
you are right is a tiny memory I never mind ,I did open before the other side and did not note that memory.
here the dump if anybody know where is the pincode.


Join Date : Feb 2013
Posts : 5
Thanks : 3
Thanked 0 Times in 0 Posts

[peloncini]

Only your time is expensive for you?
I do not know what that means but thank you for everything.


IF anybody can help me with this pincode please.
Thanks in advance for your cooperation.

[rokibar]

I do not know what that means but thank you for everything.


IF anybody can help me with this pincode please.
Thanks in advance for your cooperation.
try pin 2733

[peloncini]

try pin 2733
thank you .
I will try and report.

[peloncini]

thank you .
I will try and report.
PERFECT.
Althougt i dint use the pincode because i did the work with fvdi the pincode was right.
Fvdi is exellent with chrysler ,dodge ,jeep.
After load the dump file into the new (used) skreem module and then write all came to normal and the truck Nitro started and then i did read pincode and it was 2733 like you told me.
thankyou everybody.