Daewoo kalos lost key...

[hbfj]

I have a kalos 1.2 , the only one chip is broken. I read the immobox eprom ( 93lc56 ) in 8 and 16 bit mode too , the effi is recognized the 16 bit dump ,so i tried to add keys - EFFI made a full empty output dump, i tried with abrites tag tool . I wrote the created dump , but the car won't start and the immo led blinks .

Could somebody write this key (75BC6251) into the dump and tell me what is the correct dump ? The car is more than 20km away from me :(

Thank you for the help.

I have SBB and Obdstar X300dp too - but i have not tried yet .

[rokibar]

he will go. write them in 16bit format.
475842

[dtip]

i did same car today (only spare key), it was 2010 aveo same petrol 1.2 engine, after i saw some strange dump outputs from effl and fvdi tag tool i did' not change eprom and took SBB (Chevrolete-Daewoo --> Kalos in menu) and obd programming went without problem.
Also to mention it was quality JMA id48 magic2 tranponder (tp08) since i saw in some other threads that others had problems with magic2 chips on chevy.

[lesakljucevi]

Simple, add key with SBB,no pin need.

[lion0304]

Once key program by Effi or Tag by dump, try read the key. If you see key is locked. It is good to start.

If not locked, cannot start. I've just made experience with 2 first Jumper iD48.

All using Effi, not work. Cannot program by OBD. Showed no transponder.

Program with TM100, start the first time.

[hbfj]

Thanks for everyone . I selected another method : wrote back the original dump , and changed a new id48 chip's id into 7CCEA924 with vvdi key tool and the car starts :)