Mondeo MK3 immo

[nikte]

Hello I try to read this ecu with fgtech K line no luck and bdm with fgtech and bdm100 without any luck
Where are eeprom that are immo stored so I can read only eeprom or move the chip?
I try all pinout I found on internet but if someone know for sure pinout can be please to attach here
Thanks
https://uploads.tapatalk-cdn.com/20170929/0907e043f8854d29e31a26c19f6d5bdf.jpghttps://uploads.tapatalk-cdn.com/20170929/0e85cb3636622f216d80d4b31f7a5d94.jpghttps://uploads.tapatalk-cdn.com/20170929/6ca530eccc13d9d5ef90b0b481a3c67a.jpg


Sent from my iPhone using Tapatalk

[nikte]

i copy data from 1001377-95160 for immo now maybe need mpc and flash because ecu are not the same version

[kiszka]

...............

[nikte]

Anyone can help with pinout I try with fgtech54 bdm100 and xprog and can’t read mcu
I use pinout like in picture and add 12v to pin 4 and gnd to pin1
I removed eeprom a read write with tl866cs now need to copy Mcu and flash if there’s any on this ecu :-)
https://uploads.tapatalk-cdn.com/20170929/87ca2c9e033ea6cf445ca5d4ff2f81e2.jpg


Sent from my iPhone using Tapatalk

[nikte]

Mpc555 can’t connect
Flash ?
Eeprom read done

[nikte]

https://uploads.tapatalk-cdn.com/20170929/fcec7851637701490efe384adef11f98.jpg
Done read


Sent from my iPhone using Tapatalk

[nikte]

There are no ext flash in this ecu only mcu and eeprom and here are some mcu dumps



Sent from my iPhone using Tapatalk