Peugeot Partner 2011 looking for BSI dump

[Anzelmas]

Hi, m8s!
My BSI is in boot mode after reading PIN with FVDI.
Can somebody help me with dump for this BSI:

Functional Plan No: 9664058780
Manufacturer: Johnson Controls
Functional Product No: 9666895580
Software Index: 05.02
Calibration Index: 00.00
Diagnostic Index: OR
Serial Number: 010207
Manufactoring Date: 11/8/203
Systaem: B0
Software edition: 17.23
Software signature: E2.EC
Software reference: 9678922580
Programming Date: 2/7/2011
Reprogaming counter: 1

I tried to write the flash which was saved by FVDI, but I am getting the error "Checksum Error".
Or maybe somebody can fix mine and calculate the PIN?

[doctore]

tr write on table same flash

[Anzelmas]

Thanks for a kick :) I will try tomorrow.
Can you calculate the PIN from this dump?

[doctore]

If you write it down successfully tomoro with v5.10 or v6.3 read securite code after that on table 476258

[TERMINATOR1000]

hello , could you provide me other ( VALEO & SIEMENS )PSA BSI pin out for on table connection ?
Best regards

[doctore]

you do not need other only this for jc ;)

[Anzelmas]

doctore, you mean to try write with FVDI on the table, not direct to processor? And can you confirm that ground is pin 8 in grey connector? The photo not very clear.

[TERMINATOR1000]

you do not need other only this for jc ;)
Sure ! No problems with other BSI using FVDI ? :stupido:

[doctore]

doctore, you mean to try write with FVDI on the table, not direct to processor? And can you confirm that ground is pin 8 in grey connector? The photo not very clear.

That's right, sir

[Anzelmas]

No way to write the dump saved by FVDI. :(
Every time getting Checksum error.
Still looking for the dump with Software signature E2.EC

[porter77]

No way to write the dump saved by FVDI. :(
Every time getting Checksum error.
Still looking for the dump with Software signature E2.EC

This has to be Your flash ( or very close )

9664058780
9678922580
05.02

[ssemmedo]

i have the same problem ill post result. thanks

[garagesport]

Hello fellow I have the same problem trying to read car pin off everything I need to do mates ??

[Jlrou]

Hi,
Have you the BSI software of Peugeot 308 CC 163cv ?
Or it is the same like Partner up?

Manufacturer: Johnson Controls
Functional Product No: 9666895380
Software Index: 05.02
Calibration Index: 00.00
Diagnostic Index: OR
Serie : 011106
Manufactoring Date: 11/8/2030
Systaem: B0
Software edition: 17.23
Software signature: E2.EC
Software reference: 9678922580
Programming Date: 12/06/2011
Reprogaming counter: 1

Thanks for your help.