Activate Laptimer and Needle Sweep in 8P and 8J Dashboard

[mrle9]

Hi ,

After few research I found the process for unlock Needle Sweep (aka Needle Staging) and LapTimer in Dashboard for 8P and 8J with White FIS.

No need to replace eeprom software by a S3 software because function are present but disable in all white FIS dashboard.

This mods was succesfully tested on all white FIS dashboard with part number below :

A3 Dashboard (8P) :
8p0920931
8p0920932
8p0920901
8p0920983 (UK)

TT Dashboard (8J) :
8J0920981 (UK)

You need :

1x i2c programmer like CH341A , ezp2010 , minipro , ...

1x SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit

-----------------

Don't forget to add me Thanks and Reputation if you enjoy my job http://www.mhhauto.com/images/skype/handshake.gif

Password is : lapneedlebymrle9


http://www.mhhauto.com/images/lina/049.gif

Bye

[j4fme]

thanks for ur work mrle9
maybe you have a solution for 8j red fis? number 8j0920930c, file attached.

[dagat]

is TMPS control possible?

[umutsavasim]

Hi ,

After few research I found the process for unlock Needle Sweep (aka Needle Staging) and LapTimer in Dashboard for 8P and 8J with White FIS.

No need to replace eeprom software by a S3 software because function are present but disable in all white FIS dashboard.

This mods was succesfully tested on all white FIS dashboard with part number below :

A3 Dashboard (8P) :
8p0920931
8p0920932
8p0920901
8p0920983 (UK)

TT Dashboard (8J) :
8J0920981 (UK)

You need :

1x i2c programmer like CH341A , ezp2010 , minipro , ...

1x SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit

-----------------

Don't forget to add me Thanks and Reputation if you enjoy my job http://www.mhhauto.com/images/skype/handshake.gif

Password is : lapneedlebymrle9


http://www.mhhauto.com/images/lina/049.gif

Bye


I need this file but I can't download it. I said hello to the forum :)

[Adam871]

2 - Locate the eeprom 24c32 , connect the clip and read eeprom

3- For Unlock Lap Timer

Go to Adress 00000060 and activate bit N°5

4- For Unlock Needle Sweep

Go to Adress 00000061 and activate bit N°2

[umutsavasim]

Thank you for your reply. I try this.


2 - Locate the eeprom 24c32 , connect the clip and read eeprom

3- For Unlock Lap Timer

Go to Adress 00000060 and activate bit N°5

4- For Unlock Needle Sweep

Go to Adress 00000061 and activate bit N°2

[wersu]

hello,

i heard it is possible to activate oil and boost in the eeprom

adress 62 bit 4 and 5
adress 63 bit 1 and 7

is this correct ? on my dash it is not working ...

[eelkar]

is the activation option a needle swap in the meter with eep 93c86 8P0920930g?

[eelkar]

is the option to activate the needle change in the counter with eep 93c86 8P0920930g? or just a clock from micronas?

[DjDvr]

Not possible in 93c86

[Adam871]

hello,

i heard it is possible to activate oil and boost in the eeprom

adress 62 bit 4 and 5
adress 63 bit 1 and 7

is this correct ? on my dash it is not working ...

Its not correct

On micronas its possibile.707631

[MirzaMil]

may you please help me to activate boost gauge and oil temperature on my board computer ?

[J328D]

Hi m8s


i must the old thread back.

can anyone tell me the adress too enable the boost and Oil temp on this cluster.
This is my own car and i want this working.

my dump in attachment.


Thanks in advanced

[evgeny87]

post picture of sticker on the cluster

[J328D]

my dash is 8p0920931T from 2009 with white fis

[evgeny87]

not possible on your dash

[stasiakm88]

Anyone know how to activate boost and oil temp?

[dragos1294]

you know if its working for 8p0 920 981j the boost activation? thanks

[DjDvr]

you know if its working for 8p0 920 981j the boost activation? thanks

boost not possible on red clusters, needle sweep yes