2010 W204 First Time Miles Correction

[ascrap2003]

Ok have one to do and have never done a mercedes before, i have read and searched forums but a lot of info is confusing. I know there is mutiple ways to do a benz but need someone to walk me thru.

I read keep car in start, eis blah blah.
So please explain like Im 5 years old.
I have usa prog, digiprog clone, vvdi prog, x100 pro, Car prog & Maxi Sys 906bt

Whats the exact proccess?
A.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster Read & Program Eeprom
4. Install can filter into cluster harness
5. Reconnect Cluster
6. Connect Batt & Start car?

B.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster & Install can filter into cluster harness
5. Reconnect Cluster
6. Connect Batt & Start car
7. Program Cluster Mileage Via OBD?

C.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster Read & Program Eeprom
4. Install can filter into cluster harness
5. Remove Airbag & Steering Wheel
6. Remove EZS
7. Program EZS or Install Can Filter Into EZS
8. Reinstall EZS, Cluster, Steering Wheel, Airbag
9. Connect Battery & Start Car

D.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster
4. Install can filter into cluster harness
5. Remove Airbag & Steering Wheel
6. Remove EZS
7. Program EZS or Install Can Filter Into EZS
8. Reinstall EZS, Cluster, Steering Wheel, Airbag
9. Connect Battery & Start Car
10. Program Mileage Via OBD

E.
1. Put car in on position but not running
2. Remove Cluster
3. Program Cluster EEPROM
4. Install CAN filter into cluster plug
5. Re install Cluster
6. Start Car

F.
1. Do not disconnect battery keep car off/key off
2. Remove cluster program eeprom & install filter on cluster
3. Re install cluster


Sorry for so many questions I read horror stories about "------" & "999999" Miles and I dont have acess to
MB star, Abrites, AVDI, FVDI or anything like that so i need it done right the first time no head aches!
Thanx for your support & knowladge in advance!

[brend]

Ok have one to do and have never done a mercedes before, i have read and searched forums but a lot of info is confusing. I know there is mutiple ways to do a benz but need someone to walk me thru.

I read keep car in start, eis blah blah.
So please explain like Im 5 years old.
I have usa prog, digiprog clone, vvdi prog, x100 pro, Car prog & Maxi Sys 906bt

Whats the exact proccess?
A.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster Read & Program Eeprom
4. Install can filter into cluster harness
5. Reconnect Cluster
6. Connect Batt & Start car?

B.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster & Install can filter into cluster harness
5. Reconnect Cluster
6. Connect Batt & Start car
7. Program Cluster Mileage Via OBD?

C.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster Read & Program Eeprom
4. Install can filter into cluster harness
5. Remove Airbag & Steering Wheel
6. Remove EZS
7. Program EZS or Install Can Filter Into EZS
8. Reinstall EZS, Cluster, Steering Wheel, Airbag
9. Connect Battery & Start Car

D.
1. Disconnect battery
2. Touch Batt Cables toghether
3. Remove Cluster
4. Install can filter into cluster harness
5. Remove Airbag & Steering Wheel
6. Remove EZS
7. Program EZS or Install Can Filter Into EZS
8. Reinstall EZS, Cluster, Steering Wheel, Airbag
9. Connect Battery & Start Car
10. Program Mileage Via OBD

E.
1. Put car in on position but not running
2. Remove Cluster
3. Program Cluster EEPROM
4. Install CAN filter into cluster plug
5. Re install Cluster
6. Start Car

F.
1. Do not disconnect battery keep car off/key off
2. Remove cluster program eeprom & install filter on cluster
3. Re install cluster


Sorry for so many questions I read horror stories about "------" & "999999" Miles and I dont have acess to
MB star, Abrites, AVDI, FVDI or anything like that so i need it done right the first time no head aches!
Thanx for your support & knowladge in advance!

Ooooouuu ...............mate lol

Its simple to do .

1.just disconect battery.(no need this like ...... Touch Batt Cables toghether.....)
2.Ebaut can filter install ( into cluster plug,into cluster harness or in EZS)
3.For kluster 2 sulution.

1.
Open kluster and do it job with eeprom only safe original damp. .Recomended,because if eny trable you have original.
Conect battery.Erase fault.

2.
Conect battery,do it job by obd2 (Digiprog to do 100%) and erase fault.

Thats all.Good luck.:)

[diagtech2000]

just use your digiprog clone , go to w204 c class then ezs option and then program required km, mo need for can filter


Sent from my iPhone using Tapatalk

[ascrap2003]

Do i have to check digiprog wiring? which connector? So 2010 W204 no filter needed just choose EZS option instead of tacho option?

When ever I read OBD with Digiprog it always says 0 miles or a mileage other than what a car has so I have never programmed because it scares me.

[ascrap2003]

Ooooouuu ...............mate lol

Its simple to do .

1.just disconect battery.(no need this like ...... Touch Batt Cables toghether.....)
2.Ebaut can filter install ( into cluster plug,into cluster harness or in EZS)
3.For kluster 2 sulution.

1.
Open kluster and do it job with eeprom only safe original damp. .Recomended,because if eny trable you have original.
Conect battery.Erase fault.

2.
Conect battery,do it job by obd2 (Digiprog to do 100%) and erase fault.

Thats all.Good luck.:)

Which mercedes can be done like this? Most W203, W204, W211, 212, W219 etc

[brend]

Which mercedes can be done like this? Most W203, W204, W211, 212, W219 etc

W204,W212,W221,W216,W207 Where is UDS protokol.

[brend]

just use your digiprog clone , go to w204 c class then ezs option and then program required km, mo need for can filter


Sent from my iPhone using Tapatalk

Digiprog clon not to do Ezs in this car.
Digiprog3 clon > EZS - NO SULUTION Or Just killer for this .No recomended.
> Dash- yes and good by obd.

[ascrap2003]

awesome thanx for the great info, will my maxisys 906bt be good enough to clear any errors? and edit assyst?

whats the assyst proccess on the list? Should be done last after battery connect and vehicle start up?

[eliaselias]

Just do the job like brend told you. I have do more then 50 + never had a problem. Just go to menu w204 and only do ezs. Do not be afraid because dash will show 999999 for about 20 ~~~~nd then it will go exactly to the value that you have choose. After that there is a option on w204 list with digiprog CLR error. Press it . Dont be also affraid abs and esp will light on on dash . Then after about 20 s all is ok.
if dealer do a full scan with star he can see that the ezs is 1.6million km.
good luck

[brend]

Just do the job like brend told you. I have do more then 50 + never had a problem. Just go to menu w204 and only do ezs. Do not be afraid because dash will show 999999 for about 20 ~~~~nd then it will go exactly to the value that you have choose. After that there is a option on w204 list with digiprog CLR error. Press it . Dont be also affraid abs and esp will light on on dash . Then after about 20 s all is ok.
if dealer do a full scan with star he can see that the ezs is 1.6million km.
good luck

Not all can filter to do this like you see in EZS 1.6 million km.
Another filter shwo km in ezs like have dash.(i use this).:)

[brend]

awesome thanx for the great info, will my maxisys 906bt be good enough to clear any errors? and edit assyst?

whats the assyst proccess on the list? Should be done last after battery connect and vehicle start up?


For clear fault this tool enough.For edit asist or all car edit, you most have moor experience and another tool ,because its not simple.

Just dash-----simpel.
All car edit----- not simple.(you most have experience fot this )
Good luck.:)

[ascrap2003]

I also have Carprog Original Basic Can This Do Assyst / assyst + via direct epprom read? In circuit?

[ascrap2003]

Just do the job like brend told you. I have do more then 50 + never had a problem. Just go to menu w204 and only do ezs. Do not be afraid because dash will show 999999 for about 20 ~~~~nd then it will go exactly to the value that you have choose. After that there is a option on w204 list with digiprog CLR error. Press it . Dont be also affraid abs and esp will light on on dash . Then after about 20 s all is ok.
if dealer do a full scan with star he can see that the ezs is 1.6million km.
good luck

Brend said not to Do EZS with clone "will kill dash" look up

[XmoDDeR]

and it has ended that was like reading the novel moby dick.................. long read

[eliaselias]

Brend said not to Do EZS with clone "will kill dash" look up
mine is clone of clone

[rohanmuneeb]

how did you guys go? which route did you go by?
Im doing my w204 in the next couple days but want to confirm that I do not need a can filter and if I can do ezs via Digiprog 3 clone??

[rohanmuneeb]

So I have read if you go via this route:
Digiprog3 clone v4.94 -> obd-> Mercedes w204 -> ezs NOT TACHO DIAG -> then adjust mileage

That will work right but only thing is you will see 1.6millionkm on EZS. My question is on the dash will you see the new mileage??

[rohanmuneeb]

Or do I adjust mileage on EZS first then TACHO DIAG??

Or Would the best way to get a CAN Filter, installing that on the back of the cluster than using Digiprog 3, adjusting mileage via TACHO DIAG?

[rohanmuneeb]

sorry just looking for some guidance