PDA

View Full Version : ski doo etec mileage correction


newbie00
30th September, 2017, 07:49 PM
original cluster shows 6644 miles, need it to be 1875 or as close as humanly possible. Thanks

hope i was able to read this right.


Thanks again guys
9s12hy64 mcu
Berubeg
1st October, 2017, 02:11 AM
May be you say but hours in ecu
newbie00
2nd October, 2017, 10:03 PM
so this dump does not contain mileage? it is inside the ECU.
Berubeg
2nd October, 2017, 11:39 PM
Km in cluster hours in ecu. And average of km per hours is around 30-35 km/h on snowmobile
newbie00
3rd October, 2017, 12:32 PM
so just that i understand correctly if i get ECU and change it there, it should change it on the gauge without doing anything to gauges? or must you chance in both places.
burtreed
6th January, 2024, 12:24 PM
Hi! Old thread but I hope I can get some help. Working on a cluster with 9S12HZ256. The display doesnt lighten up and the needles not moving when I attach 12v anymore. Looks like something disappeared from the coding. Attaching dump
Diagcar1
6th January, 2024, 01:41 PM
Hi! Old thread but I hope I can get some help. Working on a cluster with 9S12HZ256. The display doesnt lighten up and the needles not moving when I attach 12v anymore. Looks like something disappeared from the coding. Attaching dump

Your file contains only Km, its missing all the needed data.
burtreed
6th January, 2024, 02:08 PM
Your file contains only Km, its missing all the needed data.

I guessed that! Thanks for confirming it.
It seems like I don’t manage to do a complete read. And complete wright. Cause if I take another read file and wright it it doesn’t seems to be a complete write