Polo 2009 1.4TDI, MPPS ECU not found.

[Nortune]

Hello. Searching for some advice.

Connecting MPPS to OBD port, but every time message ECU not found.
Tried to connect with two MPPS adapters, same result.

Message that fuses may have to be pulled.
One or two fuses, and which ?
Any other method to try?

The car s a 2009 9N3 type Polo, Bluemotion. MPPS V18 - Clone. MPPS V16 - Clone.

[h0m3s1ck]

Hello. From what I know you can't read it with mpps on obd.
You might be able to read it with kess but on the bench (off the car).

[Nortune]

Ok. Belived that it would be readable by OBD. Motor is code BMS, EDC15P+ ECU.

So this ECU must be opened up for soldering?

[cheero]

EDC15P+ no problem read via OBD - Galletto, KTag Kess Superflash and more more ...

[Nortune]

Well.. - after taking out the ecu, its clear that it`s NOT a EDC15P+, but EDC17U05.

Was reliyng to much on info on the tuner website that i used.

Recon its time to hand it over to more professional people. :peaceful:

[Nortune]

ECU was found to be EDC17U05.... Trusted website to much to bother to check.

I`ll leave this to more professional people. :peaceful: