Renault 1.5 DCI Delphi DCM1.2 Virgin

[aqua_life]

Hello,
I have Renault Kangoo ECU with faulty ECU.
I bought used ECU with same reference 8200513076 / 8200582518.
TRW / Delphi DCM1.2
Inside is eeprom 95160.
Can anyone give me a Virgin file to program this ECU to vehicle ?

Thanks for your help

[kiszka]

...........

[aqua_life]

Thanks for your help.
But car is far away and difficult to test and report. So, I have decided to make full ECU clone (eeprom + ST10F280) from old ECU to new ECU because there is no 100% sure good virgin file.
So, it gives more work, but I prefer to make full clone and don´t have make job second time.

Thanks for your help anyway.

[Emre28]

Do you have ST0F280 and 95160 virgin or original or immo off software

[kiszka]

...........

[Emre28]

95160 eprom software deleted How do I solve this

[kiszka]

...........

[Emre28]

dcm 1.2 R0410B037D

8200911562
8200767242


SERİAL NO: 87463118 DDG

[kiszka]

...........

[Emre28]

IMMO ışığı açık

car not working

[lion0304]

Need coding injector when virgin for this ECU

[gege974]

Hi
can you post the original file of your eprom please?

[alclot]

Hi mates,
I have kangoo to make virgin. Can anyone help me please?
Thanks in advance ;)

[lion0304]

Hi mates,
I have kangoo to make virgin. Can anyone help me please?
Thanks in advance ;)

Here your file made Virgin. Need codng injector.

[alclot]

Hi again mates,
I have a strange situation. After program immo on ecu car works fine but it losts the power steering. I tried other donor ecu and the same. Has anyone has this situation before?
I dont know how to fix it.
Thanks in advance ;)
power steeringpowerpower steering

[gege974]

Hi
write your VIN and the direction will come back

[markiyan]

Hi again mates,
I have a strange situation. After program immo on ecu car works fine but it losts the power steering. I tried other donor ecu and the same. Has anyone has this situation before?
I dont know how to fix it.
Thanks in advance ;)
power steeringpowerpower steering

Hi. How did you made sync? I have DCM1.2 clio III and the car was previously modified by someone. I would like to put auto-sync file. Do you have the solution for this ECU?