View Full Version : Scania EMS S6 - component help
thayer201
12th October, 2017, 08:28 PM
Hey DK's
i am after a little help with this Scania EMS S6 running on 3 (REAR BANK is working)
have no injector 1,2,3 does anyone know which component is damaged or what to check on this one.
LOW voltage plug B2 pin 7 Voltage supply to the injection timing solenoid valve for the front bank
upload pictures any help would be great thanks
br
thayer201
thayer201
13th October, 2017, 03:05 PM
any help fellow DK'S
thayer201
18th October, 2017, 03:03 PM
Thinking ahead ................
are these possible to clone just change eeprom?
is the flash locked - NO WRITE?
anyone done these before?
SOLVED ..................................................
Hey DK's
i am after a little help with this Scania EMS S6 running on 3 (REAR BANK is working)
have no injector 1,2,3 does anyone know which component is damaged or what to check on this one.
LOW voltage plug B2 pin 7 Voltage supply to the injection timing solenoid valve for the front bank
upload pictures any help would be great thanks
br
thayer201
dist01
10th January, 2018, 02:59 PM
Thinking ahead ................
are these possible to clone just change eeprom?
is the flash locked - NO WRITE?
anyone done these before?
SOLVED ..................................................
Do you repaire it or change ecu?
I have a same problém.
Somebody have solution?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.