View Full Version : Volvo S60 inaccurate dump
nikte
15th October, 2017, 12:14 PM
Hello
I just read vovlo s60 2001 with upa HC912DG128 3K91D and try to edit dum in NYO2015 and km are not accurate
km on dash are 300339 and in nyos2015 show 299280
Are this tolerated or i did wrong read
I need it back on 289000
hivrich
15th October, 2017, 12:24 PM
Hi. Your file
nikte
15th October, 2017, 07:58 PM
Tested with carprog and upa don`t need to lift pin on mcu or cut trace
Volvo V60 2001
MC68HC912DG128 3K91
BLUE – Reset signal to MPU;
BROWN – GND (ground);
GREY – BKGD communication signal;
RED – switched +5V;
hivrich
15th October, 2017, 08:30 PM
479146
??????????????
nikte
15th October, 2017, 08:36 PM
What part did you not understand?
hivrich
15th October, 2017, 08:43 PM
I repaired the instrument panel of the XC90, there 1 pin - +12
The connector is the same for 14pin
Do you submit +5v to 1pin?
nikte
15th October, 2017, 09:07 PM
There are 3 types of different connectors and there are few differences in pinout
I use +5v on pin 1 from carprog or upa no need for 12v
i also read full mcu with upa with BKGD and RESET conected on board and GND and +5v on connector (from upa not extra power supply)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.