probs with dream up

[bobbybritt]

hi problem with flashing with dream up ip address,it stops at [calculting cheksun] only on 600 dm500 is fine,it works on 600 without ip is there anything i can do to fix this thanks. bobby

[ianmac]

hi problem with flashing with dream up ip address,it stops at [calculting cheksun] only on 600 dm500 is fine,it works on 600 without ip is there anything i can do to fix this thanks. bobby

Just take the tick out of "Use Network" & flash it without..

It will take you longer but you won't get any errors...

Hope this helps

Ian

[bobbybritt]

hi yes i know all that,but i want to know why is it stopping on calculatng checksum.thanks

[ianmac]

I have never seen that on mine.

You are not trying to flash the same image on both of the boxes are you,

Coz I was to believe that the 500 is a .img format whilst the 600 is a .nfi...

Ian

[bobbybritt]

hi its.nfi ,have tryed a few .nfi still the same problem no probs with 500.img.thanks

[ianmac]

Have you tried using "Dreambox Control Center" as it shows you internet connection, & if it is getting lost it will show.

My 600, defaults the ip to the first available DHCP,
(192.168.1.100) when I flash it that way, so do think it is that.

[kwasiarsenal]

hi, i'm having the same prob flashing my dm7025. it say something like "cannot ping box in serial mode" any way to solve this without uncheking the network?

[chriscross9]

Hi there i am a newbie but i have done this many times over the past 6 months, the easiest thing to do and QUICKEST is to open dreambox control centre and go to the telnet option, then write this in exactically shown below....

mount -o remount,rw /boot
rm -f /boot/*
reboot

once its complete, the box should restart......

then open an internet explorer window and type the box ip into the browser, it will bring up the page where u then click "update box software" and then it will upload the image in around 1 miniute.

please let me know if it works for you.

chris.