2008 CAYENNE IMMO INFO CONTINENTAL KESSY

[cqae]

I was hoping someone could give me the pin & CS from the kessy dump. Its a continental unit & your help would be appreciated!

[CarCity]

PIN : 52462
CS : 11 DB D3 B4 F1 9D 1E
VIN : WP1ZZZ9PZ9LA47152
Immo ID : VWZ3Z0I1841942

Good job

[cqae]

thanks mate, what software did you use for this?.............And thanks for replying so quickly!!!

ANd i tried to learn the key with avdi & it said security access fault after I typed in the pin, anyone got any ideas?

[CarCity]

Thank you
I extract info VVDI2

Key 1 ID : 49485CBA
Key 2 ID : 535AE043
Key 3 ID : 3E2801FF

[Room]

i tried to learn the key with avdi & it said security access fault after I typed in the pin, anyone got any ideas?

Pin & CS are not correct.
I`ll post it tomorrow, I need time to calc.

[cqae]

thanks for your help room, it wouldn't let me log in to keay learning so would be interested to see what you come up with

[CarCity]

Pin & CS are not correct.
I`ll post it tomorrow, I need time to calc.
I 100% sure PIN and CS is correct .

[haroutioun]

I was hoping someone could give me the pin & CS from the kessy dump. Its a continental unit & your help would be appreciated!
Hello.
there is no solution to get pin + CS by kessy dump for continental. there is (2) special tool to get immo data 1 direct by soldering weirs. or by connect direct to eeprom 93c86.

[Weasel3]

VVDI Prog 4.6.0 update
Kessy 2008-
Read
Then put Dump into VVDI2 and calculate.
Says it only works with VVDI2

[yugo45]

thanks for your help room, it wouldn't let me log in to keay learning so would be interested to see what you come up with
Can you read ECU and tell us when ECU you have .If you have EDC17 or MED17 need flash + eeprom?
If you have working key you can get all 7 byte CS and Pin form ECU. This way we can see is it VVDI doing correct.

[haroutioun]

Hello.
the car is European 8 cylinder petrol 4.8, and i think the ecu is simos, and to read this ecu you need special tools to have the immo data. the best way to adapt your key to continental kessy is (TMPro2)

[Room]

Pin 09073

CS 29 F8 18 0B 83 97 52

Good luck

[haroutioun]

Hello.
for me the correct pin %100 = 08305

[amigokola]

So we dont get data only by 93c86 in VVDI2 ?? It has to be dump read by VVDI PROG ??


Hello.
there is no solution to get pin + CS by kessy dump for continental. there is (2) special tool to get immo data 1 direct by soldering weirs. or by connect direct to eeprom 93c86.

[haroutioun]

So we dont get data only by 93c86 in VVDI2 ?? It has to be dump read by VVDI PROG ??
Hello amigokola.
By dump 93c86 continental kessy is so difficult to calculate pin and no tool yet can calculate by dump, but tmpro2 can adapt direct the transponder to kessy by soldering wires, and there is other tool too can adapt direct by connet clip to eeprom 93c86. About vvdi prog i don't try it yet to see the result. but for me the best of continental kessy is tmpro2 and he has so best support.

[cqae]

it was a siemens ECU, so AVDI didnt support pulling data from the ECU....

Room your CS & PIN are different, where did you get this from? I dont think the other was correct because I couldnt log in to the immo

[mustafabahar]

If you use AVDI you can do it from OBD if you dont have working key make dealer key in ezs after learn it to the car to match


Verzonden vanaf mijn iPhone met Tapatalk

[mustafabahar]

https://uploads.tapatalk-cdn.com/20171019/1d62632b93374a696d2d676d359b1784.jpghttps://uploads.tapatalk-cdn.com/20171019/c05164899b821cf612051421ffe7336c.jpg

I had same too Day but working i have


Verzonden vanaf mijn iPhone met Tapatalk

[Room]

Room your CS & PIN are different, where did you get this from?

Hi
I`m cacl using Windows calculator and some knowledge from your dump.
CS is right 500%.
But with PIN two values are possible. I wrote that I usually use.

Try and report.

[haroutioun]

it was a siemens ECU, so AVDI didnt support pulling data from the ECU....

Room your CS & PIN are different, where did you get this from? I dont think the other was correct because I couldnt log in to the immo
Hello.
cqae> yes the other was correct not same as you think. the pin of mine CORRECT = (08305) & the CS (29 f8 18 0b 83 97 52) of Room again are correct just the pin of Room was not correct. see by your self the photos i load it here.

[haroutioun]

Hello.
what happen with you cqae did solved your car?

[cqae]

No mate, I ended up cloning the key and making him a valet key for emergency and he is going to return when I have a solution.

I think the PIN may of been incorrect, and that why I couldnt log in. Ill try if the customer brings it back & let you guys know, thanks for all the help, it might be a while, but I think he will come back