PDA

View Full Version : Alfa romeo giullieta edc16c39 2010y 2.0jtdm 140cv



tiugrikas
17th October, 2017, 11:56 AM
Hi mates what tool use to read bdm? I used mpps v18 read via bdm is it safe write file back via obd to this ecu? And my ktag does not support this type ecu https://uploads.tapatalk-cdn.com/20171017/7b2c50baf9ca49a4de04a82352580f65.jpghttps://uploads.tapatalk-cdn.com/20171017/b23b65bd16902ab43d4f0e809be8182a.jpg

Išsiųsta naudojantis HUAWEI TIT-L01 Tapatalk 4 Lt

luca22
17th October, 2017, 12:37 PM
Hello

If You read by BDM that file You must write it BDM to
OBD and BDM file are different...
BDM programing is always safe if You have Backup of ECU

If You have Gv54 use this tool, I think Galletto do that ECU no problem by BDM

Regards
Luca

tiugrikas
17th October, 2017, 04:07 PM
Hello

If You read by BDM that file You must write it BDM to
OBD and BDM file are different...
BDM programing is always safe if You have Backup of ECU

If You have Gv54 use this tool, I think Galletto do that ECU no problem by BDM

Regards
LucaI just finished this and Yes galetto v54 read bdm good recognised as mpc 561 and mpps v18 also read write via obd ok

Išsiųsta naudojantis HUAWEI TIT-L01 Tapatalk 4 Lt