AUDI A4 2.0 TDI BRD 125KW PPD1.3 03G906018AQ DPF, EGR OFF

[HydrogenV12]

Hello friends,

I need help with my Audi A4 2006 2.0TDI BRD 125KW 03G906018AQ, PPD1.3


Car are in workshop for 4 weeks (No power after 3k(no boost), smoke from exhaust like to much fuel, bad starting, bad work on idle.):
Turbo -> OK
Injector were removed and checked->OK
Tandem and Fuel Pumps->OK
Everything Checked, even tried to change ecu. The same.

I have opinion maybe its DPF or EGR-> Worth a try, but i don`t have any error is VCDS.

Maybe somebody can help me with DPF-off and Egr-off and any unnecessary problematic stuff off.

File read through OBD port.

Thanks in advance.

[mariazo84]

Goodnight
I have had the same problems in several a6 blb also have small jerks?
check the screws and toricas of the inectors in my case several were stretched.

[HydrogenV12]

New screws fitted after injectors was checked. On stationary tester. :/

[maajkii]

New screws fitted after injectors was checked. On stationary tester. :/

DPF + EGR off.
Pass PM, use THANKS and REP button (star)
let your tool make chks.

[lovinedi03]

Please help me!! I need dpf-off for Audi A4 2.0 tdi, 03G906018AQ, PPD1.3.
I did DPF off with DPF Remover but don't work , does not accelerate more than 2800 rpm and i get an error P2563 turbocharger Boost control position sensor circuit . Thanks in advance , please help me!! I have attached both files.

[lovinedi03]

I'm sorry , This is my original file .