PDA

View Full Version : urgent help need virgin ecu peugeot 407 6lp1.02



gselectric
19th October, 2017, 08:36 AM
urgent help need virgin ecu tested 100 without configuration error peugeot 407 6lp1.02 dump attached or matched ecu and bsi with pin cod thx in previous

kiszka
19th October, 2017, 12:34 PM
..........

gselectric
19th October, 2017, 12:54 PM
it is 100 % same original nothing changed then using immo decoder configuration problem thx m8

kiszka
19th October, 2017, 01:38 PM
..........

gselectric
19th October, 2017, 02:50 PM
test......Configuration fault egr valve learning locked closed no comunication on network mm6lp failure of ls can

Sent from my LG-D855 using Tapatalk

CarCity
19th October, 2017, 02:55 PM
Your car with electric thermostat or without ?

gselectric
19th October, 2017, 03:06 PM
Your car with electric thermostat or without ?No thermostat is normal when i plug this ecu fan work quickly

Sent from my LG-D855 using Tapatalk

CarCity
19th October, 2017, 03:09 PM
No thermostat is normal when i plug this ecu fan work quickly

Sent from my LG-D855 using Tapatalk

I did not ask because of the problem with fan or ...
my ask for virgin dump

gselectric
19th October, 2017, 03:12 PM
I did not ask because of the problem with fan or ...
my ask for virgin dumpOk thank u

Sent from my LG-D855 using Tapatalk

gselectric
19th October, 2017, 03:22 PM
If there is any matched already bsi and ecu and i make new transponder would be better

Sent from my LG-D855 using Tapatalk

gselectric
20th October, 2017, 12:29 PM
If there is any matched already bsi and ecu and i make new transponder would be better

Sent from my LG-D855 using TapatalkAny help please

Sent from my LG-D855 using Tapatalk

rex89
20th October, 2017, 01:24 PM
Hello guy
here u go...................

gselectric
20th October, 2017, 03:33 PM
Hello guy
here u go...................Sir is it the tested one because i already tried to put ffff from 4000 to 8000 and it doesnt work

Sent from my LG-D855 using Tapatalk

rex89
21st October, 2017, 03:19 PM
Hello guy , i try always this method work at 100% , u need have some problem with u ecu