View Full Version : vw30 SRS with Infineon tricore !
dataman
19th October, 2017, 12:56 PM
Hi has anyone worked on one of these yet and has any info?
continetntal A2c96378510
infineon sak-tc275tc-64
dragon100
19th October, 2017, 01:32 PM
First try clear vcds via obd or launch, autocom newest ...
eprst
20th May, 2022, 03:11 PM
Hello, can anyone clean up the stored B2000 errors in the dump?
superjet
21st May, 2022, 01:34 AM
Hello, can anyone clean up the stored B2000 errors in the dump?
Upload your ori file
eprst
22nd May, 2022, 09:01 AM
This ori dflash and errors
central sensor is disabled at the moment
hacper
22nd May, 2022, 10:50 AM
You have to change driver first
eprst
22nd May, 2022, 11:00 AM
You have to change driver first
this error not activ in this moment
fuzz1
22nd May, 2022, 02:28 PM
You have to change driver first
Hi you mean the driver chip on the board? I guess not that easy to get. Easier to get the whole ecu
eprst
22nd May, 2022, 07:15 PM
the original unit is damaged by water, I read the processor in it and wrote it to the used block, all errors are stored from the water-damaged block, due to error b2000, diagnostics cannot delete stored errors.
fuzz1
23rd May, 2022, 02:42 AM
What about adaptation of second unit to the car?
superjet
23rd May, 2022, 03:13 AM
the original unit is damaged by water, I read the processor in it and wrote it to the used block, all errors are stored from the water-damaged block, due to error b2000, diagnostics cannot delete stored errors.
use your buy module file and use odis online adaptation.
eprst
23rd May, 2022, 06:19 AM
I first did it online using odis, but it didn’t work out - FAZ4990E
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.