Mercedes Sprinter 313 help

[huey111]

Mercedes sprinter 313 Hi guys i did DPF delete and DTC on sprinter it is now out of limp mode and going very well with modified map but the engine management light is still flashing and no fault code can anyone kelp kind regards m

[maajkii]

how we can help you if you doesnt post your file?
i think you delete DPF with ADS remover, swiftec solution works very well.

[huey111]

Sorry DP please see attached

[maajkii]

post ori too

[huey111]

Please see attached ori file

[AVDigitale]

need to reset dpf values before writting the file or need to do manually dpf switch with winols

[huey111]

hi AVDigitale, i reset dpf before flashing mod file, i sent ori file away to have dpf and dtc delette as i use race standard for my tuning

[AVDigitale]

post your ori file and mod file without dpf to check what is problem

[maajkii]

Please see attached ori file

your file with dpf off..
chks ok.
pass pm.

[huey111]

Please see att both ori and mod

[huey111]

this file brother

[huey111]

Hi Guys i am still having problems with this sprinter 313 127hp manual, same issue as original post removed DPF and dtc codes van is running perfect but i still have a flashing EML and no trouble codes, i have disconnected sensors and reconnected , checked all earthing straps checked fuses and swapped out relays but still flashing EML and no codes, any help would be appreciated kind regards Michael

[gttuning]

I had a sprinter like this few months ago..come from different garage...
My advice is load back original and reset dpf for new abd erase all dtc in ecu and eobd.
Go for a drive and read dtc with diagnostic by mercedes and generic...post them here with ori file..

Sent from my SM-G935F using Tapatalk

[gttuning]

Looks like dtc is wrongly removed.

Sent from my SM-G935F using Tapatalk

[huey111]

I had a sprinter like this few months ago..come from different garage...
My advice is load back original and reset dpf for new abd erase all dtc in ecu and eobd.
Go for a drive and read dtc with diagnostic by mercedes and generic...post them here with ori file..

Sent from my SM-G935F using TapatalkI will do tomorrow


Sent from my VFD 900 using Tapatalk

[gttuning]

I will do tomorrow


Sent from my VFD 900 using TapatalkOk.....

Sent from my SM-G935F using Tapatalk

[huey111]

Hi guys i have flashed ori file and checked both eobd and Mercedes then cleared faults only one not to clear was p2454 DPF pressure sensor 1 permanent fault short circuit to ground this is new fault, and on eobd p2bac NOx Exceedance Deactivation of egr also new, please see attached pictures of codes.

[huey111]

hope this helps kind regards Michael

[huey111]

nox is new code

[gttuning]

Once i finish work i do you a file.

Sent from my SM-G935F using Tapatalk

[gttuning]

Hi guys i have flashed ori file and checked both eobd and Mercedes then cleared faults only one not to clear was p2454 DPF pressure sensor 1 permanent fault short circuit to ground this is new fault, and on eobd p2bac NOx Exceedance Deactivation of egr also new, please see attached pictures of codes.
i cant see dtc make screen shots or just post them here in text...
tells me to log in to some ALO shit to see your dtc files.

[huey111]

i cant see dtc make screen shots or just post them here in text...
tells me to log in to some ALO shit to see your dtc files.Please see atthttps://uploads.tapatalk-cdn.com/20171129/da4e4e71d4e3180c3618dca328c97aeb.jpghttps://uploads.tapatalk-cdn.com/20171129/361f560330b760798a18eea356b88cd5.jpghttps://uploads.tapatalk-cdn.com/20171129/9a357f8d0edad6fbdae0e676a7a94842.jpghttps://uploads.tapatalk-cdn.com/20171129/7dcef08433049a4648e13741e664cec1.jpghttps://uploads.tapatalk-cdn.com/20171129/b654c7862aa4377ed0ae3696f53bca14.jpghttps://uploads.tapatalk-cdn.com/20171129/25743bb5af33fc3ac26539fd1249a61e.jpg

Sent from my VFD 900 using Tapatalk

[gttuning]

file test and report...
pass pm

[osh73]

Please send the password.

[osh73]

file test and report...
pass pm
Please send the password.