BMW 120D CAS3+ 0L15Y CORRUPT

[kenza287]

Hello
here I have a bmw 120D E87 2007
After an update of the case3 + mask 0L15Y
61.35-6943834 5WK4 9513CBR


via avdi original
the car has no sign of life
no communication with the diag
no contact
no centralization


I deduce that the case3 + is corrupt
but I'm not so eeprom or flash that is corrupt?


So I buy on the net a flash file + eeprom
then I wrote it
then make a new key via keytool


by going back the case
centralization works
ok diag communication
but I have the key with the cross on the dashboard
and impossible to put the ignition
the key is register well on the diag
I have 3 key still no startup


while they are well recorded in the case3
I did a successful case3 / elv sync but no contact


the trouble is that the flash and eeprom on the box number
but may not be the good HW?


I enclose the original corrupted case3 file
and the files that I buy


Thank you for your help

[dijo]

Hi, your eeprom dump looks good...
this is in orinal state...
but this dump is crypted...
so if you plan to make key, then have in your mind that this dump need to br decrypted before generate key...
or AVDI make it in the background with key in TKT (this I dont know, dont have it)
dont buy from anywhere dumps because they are useless!
To reprogram Cas use only Ista/P

[kenza287]

thank you for your quick reply
yes I made the key via the dump eeprom
I think that even encrypted
avdi managed to do it
I tested it on 2012 CAS3 model
Many times he has always succeeded
the car is from 2007
AND diag I see the new key register
and the remote remote control works with a new key
but she shows me the logo of the key that is not recognized
it seems strange to me
I join you the dump with the key programmer

[dijo]

Have you another working key for this car...?

[kenza287]

yes I have a working key
with the original file


and for the download file on the internet
I created a key via the dump

[dijo]

m8, your problem is your tool, they dont decrypt your dump correctly...

[kenza287]

WHAT are the solutions
to adapt this new case3


help me thanks

[dijo]

M8, I dont understand you...
Have you 1 key to start your car at this moment...?
If not, and you will take another cas dump, then you need to decrypt this dump, and this you can only with working key that is programed to this dump or SK/ISN from DDE that matched with this dump...

[kenza287]

no I'm not a key that starts the car


because original file no reaction and no communication
to the diag


with the 2nd file I make a key via dump
centralization ok
ok diag
but not starting


so if I understand you even if I buy a case3 +
ONLY IT WILL NOT BE POSSIBLE TO ADAPT?

[dijo]

Have you key and Cas dump who has working before, and start´s your car before anyone works on this car?

[kenza287]

yes good the car start 2 DAYS very well with his original key
yes I have his original key
and the original case
with the flash dump and eeprom original
but corrupted after updating the case3 +


the first files that are published are the original files
Thank you for your help

[dijo]

Ok, read your key with hitag pro and post here screen image...


Enviado do meu iPhone usando o Tapatalk

[kenza287]

I just read the key with hitag
but we do not see much


IDENT C6711D96
SK LOW -----
sk high -------
config ---------
page0 -----
page 1 ------
page 2 -------
page 3 -----


transponder type 7953

[dijo]

ok, take you Hitag and write in the upper right corner "parameters" =
SK low = 4BE23017
SK high = 3447
now tick once read again...
with this parameters and your key you will unlock your transponder...
know give me "Config" code
or post here Screen!!!

[TVO]

here is your ori cas good working !

http://i.piccy.info/i9/487c8d7dbefb5058f2dce9b80651742b/1508856016/64818/1189728/22831199_534062410276867_1937565970_o_800.jpg (http://piccy.info/view3/11704868/d85f40f526b82ba4e8b2122dc4ca7f9a/1200/)http://i.piccy.info/a3/2017-10-24-14-40/i9-11704868/800x450-r/i.gif (http://i.piccy.info/a3c/2017-10-24-14-40/i9-11704868/800x450-r)

[kenza287]

good evening thank you very much for your help
I join you the photo of the hitag


there is 4 picture
2 photo READING the direct key
2 photos with the modified SK parameter


thank you

[dijo]

Ok, now post here your dump that that you have working with remote and only dont start the engine...

[kenza287]

ok I attach the new file to download on the net
with the key save on table via the dump


centralization works but no contact
seeing it with the locked key

[kiszka]

..........

[dijo]

ok I attach the new file to download on the net
with the key save on table via the dump


centralization works but no contact
seeing it with the locked key


M8, here is your Ori key adapted to another dump, try it...
if this dont will work, then your only way is to reprogram Cas with Ista/P...

[kenza287]

hello
thank you for help
fichier kiszka
your file must be written with its flash
with your file no communication and no reaction

[kiszka]

..........

[kenza287]

your file must be written with its flash
retrieve on the internet

[kenza287]

??
SORRY
IT IS QUESTION

[kiszka]

..........

[kenza287]

Good evening
so after trying the files you sent me
the file has dijo
no reaction of the vehicle
no communication to the diagnosis


the first file kiszka
no reaction of the vehicle
no communication to the diagnosis




the 2nd file
centralization ok
diagnostic ok
but the logo of the crossed out key and no contact
as the file that I buy on the internet
Thank you for your help