PDA

View Full Version : BMW X3 2.0D edc16c35 DPF off



mack0r
24th October, 2017, 08:07 PM
Hello i need working solution to DPF off on this file for free. Forum is for helping right?

gsmik
24th October, 2017, 08:23 PM
Yes "forum is for helping" but here is the rule - You help me I help you


Newbiehttp://www.digital-kaos.co.uk/forums/images/styles/DarkCore/reputation/reputation_green.gifJoin DateMar 2017Posts2Thanks0Thanked 0 Times in 0 PostsDownloads0Uploads0

mack0r
24th October, 2017, 08:38 PM
Of course. How can i help you :)

gsmik
24th October, 2017, 08:54 PM
I do not need help right now but need help from other people in this forum. Start asking for help and not scream for free files

mack0r
24th October, 2017, 08:56 PM
I newbie, how can i help others who know much more..

maajkii
24th October, 2017, 08:57 PM
Hello i need working solution to DPF off on this file for free. Forum is for helping right?

pass pm..
use thanks and REP button (star)

maajkii
24th October, 2017, 09:11 PM
I Send you pass, And i tell you. Use Thanks And Rep button? Why dont you do this?


Wysłane z iPhone za pomocą Tapatalk

mack0r
24th October, 2017, 09:28 PM
My friend i drive car 5min ago. :)

mack0r
24th October, 2017, 10:10 PM
This solution is not working. Switch is not enough for this ECU

gsmik
24th October, 2017, 10:33 PM
Here you are PASS PM

mack0r
24th October, 2017, 10:47 PM
Thanks. This is tested solution?

gsmik
24th October, 2017, 10:57 PM
Yes tested solution

mack0r
25th October, 2017, 08:16 AM
Your solution is switch + dtc? I see switch but i dont know what else

johak
25th October, 2017, 09:05 AM
your dpf off file

flashtech
25th October, 2017, 11:13 AM
Best solution for 2.0d engines is flash nonDPF software through WinKFP. Tested many times.

ashm431313
25th October, 2017, 07:12 PM
flashtech is this also a soloution for edc16c35 3.0d? as i can not find non DPF version in sp-daten :(

maajkii
25th October, 2017, 07:23 PM
flashtech is this also a soloution for edc16c35 3.0d? as i can not find non DPF version in sp-daten :(

Post Your file, Its easy to do DPF off


Wysłane z iPhone za pomocą Tapatalk

flashtech
25th October, 2017, 10:04 PM
flashtech is this also a soloution for edc16c35 3.0d? as i can not find non DPF version in sp-daten :(
Didn't tried it to 3.0d. But about 2.0d im 100% sure.

ashm431313
26th October, 2017, 11:59 AM
at the moment i am using a donor ecu untill my bdm100 arrives so a little help will be needed much more when i clone and refit my original ecu :)

If you dont mind could you check this mpps dump of my currant donor ecu as i think dpf off is not correct, at idle after a few minutes i am getting white smoke but no fluid loss so i think this is something to do with EGT maybe? will i be saffe running this donor for a few more weeks??

Any hints tips or help will be greatly appreciated but is not critical for now as i will be reverting back to my original when my bdm100 gets here in a few weeks.

flashtech
26th October, 2017, 01:26 PM
White smoke is only on cold engine or on hot too? I had problem with white smoke on idle, but engine was 2.0d. Problem was with egr - but there was no faults. So i removed vacum pipe - smoke dissapeared. Then i just programmed it out from sw.

ashm431313
26th October, 2017, 02:02 PM
White smoke is only on cold engine or on hot too? I had problem with white smoke on idle, but engine was 2.0d. Problem was with egr - but there was no faults. So i removed vacum pipe - smoke dissapeared. Then i just programmed it out from sw.



thanks i will take a look at the egr.

it is usually once warmed up and never on first start up i have also noticed it does this a LOT after clearing fault codes/rediness then after a good few cycles it does it less and less also i dont belive it is the egr because white smoke does not happen when i have the low fuel warning, i have read that this is an indication the dpf is doing a partial regen and is canceled by low fuel condition

Mikiiii9999
6th June, 2023, 03:18 PM
your dpf off file
can you tell me what the password is