PDA

View Full Version : Audi A6 flap off



velver
25th October, 2017, 08:56 PM
Hi
please
can you help me out of SWIRL FLAP OFF?
it's damaged and I'm wrong with P1018

Audi A6
3.0
16cp34

kinketotua
26th October, 2017, 06:05 AM
Hi friend. Here your file

Have a nice day

velver
26th October, 2017, 09:45 AM
I did not understand the meaning of this solution, but thank you

maajkii
26th October, 2017, 10:30 AM
Hi
please
can you help me out of SWIRL FLAP OFF?
it's damaged and I'm wrong with P1018

Audi A6
3.0
16cp34

flaps off, test and report.
pass pm.

velver
26th October, 2017, 11:07 AM
flaps off, test and report.
pass pm.


it is known that the solution from ADS REMOVER for FLAPS 16cp34 does not work :(

flashtech
26th October, 2017, 11:15 AM
Solution for flaps off is easy.
Did You tried at least one of those files that maajkii and kinketotua sent You?

maajkii
26th October, 2017, 11:16 AM
it is known that the solution from ADS REMOVER for FLAPS 16cp34 does not work :(

here is file with manual solution winols..
not your ecu but you can do it like on this one, im shure it working..

no password..
if someone like it, use magic buttons..

velver
26th October, 2017, 11:22 AM
Solution for flaps off is easy.
Did You tried at least one of those files that maajkii and kinketotua sent You?

yes i tried all
but the flaps are still moving
I wanted a solution to keep the flaps open

velver
26th October, 2017, 11:24 AM
this solution is most suitable ... probably, perhaps

no pass

kinketotua
26th October, 2017, 12:26 PM
but you try my solution ???

velver
26th October, 2017, 12:40 PM
but you try my solution ???

yes
but the flaps move like in org.files .... the difference can only be seen in DTC off = P1018,04119,04120

so I'm writing that I do not understand your solution, except DTC off

johak
26th October, 2017, 01:02 PM
your swirl off file

velver
26th October, 2017, 01:21 PM
your swirl off file

well thank you
this I did as the first thing .... (my post higher #9 (http://www.digital-kaos.co.uk/forums/showthread.php/623331-Audi-A6-flap-off?p=3129833&viewfull=1#post3129833)) = flaps always open to 50% ....
failure of this solution = after switching on the FLUID, the flaps are set ... but the fault stops and the flap stops in any position = 30%, 65%, 80%, etc.
means not always stop and required 50% ...