Help please Jeep 52017663 0285012776 95640

[megabits]

Good afternoon!
Please, I need help clearing a carsh file from the Renegade Jeep 52017663 0285012776 95640.
It is possible to file tested because the car is in another city.
Thanks in advance and I will not forget the magic buttons ....

[husseinalkhalel]

here it is my brother
can you see file ? and tell me
pass pm

Good afternoon!
Please, I need help clearing a carsh file from the Renegade Jeep 52017663 0285012776 95640.
It is possible to file tested because the car is in another city.
Thanks in advance and I will not forget the magic buttons ....

[repairmymodule]

Jeep Renegade not store crash data. Like new Fiat 500

[husseinalkhalel]

yes it is like 500
Jeep Renegade not store crash data. Like new Fiat 500

[megabits]

here it is my brother
can you see file ? and tell me
pass pm


I try and report..
Thanks!

[repairmymodule]

I would be leery of changing eeprom data at all, probably do more harm than good

[repairmymodule]

Find pinout for module, connect CAN hi and Low, power and ground. Then connect to your scan tool and manually select Jeep Renegade / 500 and scan SRS module and check for Deployment Record Full code. If that code is not there then there is NO crash

There must be 120 to 500 ohm resistance connecting CAN wires to read on table

[megabits]

I would be leery of changing eeprom data at all, probably do more harm than good

The right thing then is to keep the original data and discover the physical problem. Then clear the DTCs?

[megabits]

Find pinout for module, connect CAN hi and Low, power and ground. Then connect to your scan tool and manually select Jeep Renegade / 500 and scan SRS module and check for Deployment Record Full code. If that code is not there then there is NO crash

There must be 120 to 500 ohm resistance connecting CAN wires to read on table

So I'll pass the tips to the electrician. The car is in an electrical workshop in another city.

[repairmymodule]

What is the problem he is having with the module? Did he say he was having an issue or just crash?

I can send you a PDF of the wiring diagram for this module if you need it. But normally with these modules you just replace blown airbags and seatbelts and light goes out. No need to even clear with scanner

[megabits]

What is the problem he is having with the module? Did he say he was having an issue or just crash?

I can send you a PDF of the wiring diagram for this module if you need it. But normally with these modules you just replace blown airbags and seatbelts and light goes out. No need to even clear with scanner

The car crashed and the bags and seat belts were replaced, but the light was still on.

[repairmymodule]

He probably missed something, possibly damaged impact sensor or improperly connected airbag or seatbelt, like missing CPC clip etc..