Porsche Panamera BCM 7PP.907.064.CD 2M25J DFLASH & PFLASH Problem

[Autowave]

Hi All,

Posted in VVDI PROG Thread, don't want to repost against the rules!

I read the BCM and have corrupted the flash using VVDI Prog. I have redone my connections and now I can read and unlock ok but flash is still corrupted, car does not start, no ignition lights bcm just clicks.

I have attached a few reads (all from same module).

I can load the D flash into VVDI2 and it recognizes the file (allowed me to add key). However the Pflash still has a problem as the BCM just click when it is plugged into the car. So my question is this, can someone look at the various reads in my attachment and advise is they can 1, repair my corrupted PFLASH File. 2, Confirm whether my DFLASH File is OK. 3, If my DFLASH file is corrupt can this be repaired.

Thanks in advance any help appreciated.

[Multipla]

A idea ( my impression) extract pin code to ecu_motor, then try an other file bin of the bcm then try why is a pin in file donor file and put your pin code (ecu motor) in a knew file.
After put BCM in a car and proced to realigned. You should have a serious Auto-diagnosis.

[ThiagoArgentino]

Call me on skype, can I help ...


Skype: *PM him mate,please...

[Stefanomilano]

Hello I have the same problem as you on a porshe but against my vvdi pro reads the id but does not unlock the chip the first case bcm and break so I have more to give but buy a 2nd module now but how to read to adapt the key please save me

[amigokola]

So you did something wrong or it is vvdi prog foult ??

Wysłane z mojego SM-G950F przy użyciu Tapatalka

[Stefanomilano]

Good evening and thank you for answering with vvdi prog I never managed to read the bcm now the mcu and virgin I wrote D flash coding a new key blank and I wrote p flash the car still do not recognize the key I am lost I do not know how to do anymore

[Stefanomilano]

Good evening and thank you for answering with vvdi prog I never managed to read the bcm now the mcu and virgin I wrote D flash coding a new key blank and I wrote p flash the car still do not recognize the key I am lost I do not know how to do anymor.e