View Full Version : VW golf 5 - how add key
kobi2311
2nd November, 2017, 09:11 PM
Hi
My customer has got one working valid key for this car (2005 year) and want to get second.
How can I add second to car? Do I need to read manually eeprom or eeprom+micronas from cluster or can I do it by obd? Is it enough to read (obd) sec blocks from dash (by xtool or xcan)?
I have got: vcds, xtool, xcan, and tango
thanks
wissamshaat
2nd November, 2017, 09:17 PM
just copy the key with a tool like handy baby
or if you dont have a code get a code from dealer and cut a key and program it with vcds
kobi2311
2nd November, 2017, 09:32 PM
I have checked it - can not be done by Normal and standard procedure ross-tech with vcsd.
kobi2311
2nd November, 2017, 09:38 PM
This is Golf 1K with immobilizer generation 4 on board
comizelu
2nd November, 2017, 09:46 PM
You need id48 tp23 can transponder
Find pin and cs,lock the transponder and learn key with vcds..
Inviato dal mio HTC One utilizzando Tapatalk
p1et
2nd November, 2017, 09:59 PM
You need id48 tp23 can transponder
Find pin and cs,lock the transponder and learn key with vcds..
Inviato dal mio HTC One utilizzando Tapatalk
No CS needed in this year. Just tp23 CAN VW transponder and pin code or use SBB and add key without pin code.
comizelu
2nd November, 2017, 10:17 PM
No CS needed in this year. Just tp23 CAN VW transponder and pin code or use SBB and add key without pin code.So no cs and no dealer key needed?
Till what year? Thank you
Ps could you please help me with my "pin from cim on vectra c" please..
Inviato dal mio HTC One utilizzando Tapatalk
kobi2311
2nd November, 2017, 10:20 PM
Also tango will not be needed? Or can I use (read) valid key?
I have got pin code and I have tried with vcds with No luck
p1et
2nd November, 2017, 10:27 PM
Till 06/2006 in Golf 5 no CS needed. About VCDS, some people say it does not work with Micronash dash. I don't know, don't have this tool. Try with other u have if u got pin code. Just ensure you have VW CAN TP23 transponder.
kobi2311
2nd November, 2017, 10:59 PM
ok thanks
I will check and report
kobi2311
3rd November, 2017, 05:49 PM
H
do not work with vcds Normal procedure key matching as has Been written on ross-tech side. There is not any immo data at extra field in 25 immo module in vcds.
Any other idea Or I have to Open dash and do it with dump by tango
Duracell2
3rd November, 2017, 05:58 PM
H
do not work with vcds Normal procedure key matching as has Been written on ross-tech side. There is not any immo data at extra field in 25 immo module in vcds.
Any other idea Or I have to Open dash and do it with dump by tango
For Golf 5 2005 you don't need CS.
You only need PIN code for IMMO and TP23 (ID48 CAN chip)
I get my PIN with FVDI, but there are many other tools reading PIN from ECU.
After that you can add key in regular procedure with VAG-COM (VCDS) or VCP or what ever. I use usually VCDS.
Use : (25) Immobilizer / (16) LOGIN-security code / (10) Adaptation
That should work without problems (tested on European cars).
Good luck.
comizelu
3rd November, 2017, 05:59 PM
H
do not work with vcds Normal procedure key matching as has Been written on ross-tech side. There is not any immo data at extra field in 25 immo module in vcds.
Any other idea Or I have to Open dash and do it with dump by tangoIf you want to do it by tango I remember that on visteon dash you need to read flash as well and once you write transponder the new file just write it in eeprom..
Inviato dal mio HTC One utilizzando Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.