VW crafter 2.5 TDI won't start

[fmcdiag]

Hello !

VW crafter 2.5 TDI no fault codes with VCDS and Delphi, cranks but won't start.
Any ideas are welcome !

Thanks

[smirnoff_rules]

had you scanned all modules ?

[fmcdiag]

yes, there is no fault codes.

[smirnoff_rules]

in blocks does it show rpm ? have you tried easy start spray ?

[fmcdiag]

I see the rpm increasing and the fuel pressure too (60 to 500 bar)
I haven't yet tried the easy start spray.

[rui]

hello. year the car please?

[fmcdiag]

Hello ! vw crafter 2.5 tdi bjm
year : 2006

[fmcdiag]

Hello ! vw crafter 2.5 tdi bjm
year : 2006

[jakesman]

Hello ! vw crafter 2.5 tdi bjm
year : 2006let's ask the question , was it running and something was done then no start , did it come in not starting , a bit of background info would help , and I was at vw 6 years working on this things and fault do not always log the first time , so crank it for about 20-30 seconds and don't switch off the ignition and scan again , if no fault then u might have a mechanical fault , did u chech the injector return flow rate

Sent from my HUAWEI Y560-L01 using Tapatalk

[fmcdiag]

I stopped for 10 minutes and after the car didn't want to restart.
I'll try this and i'll tell you the result.
I haven't yet look at the injector return flow rate.

Thanks


I have not yet look at the injector return flow rate

[fmcdiag]

It's resolved !
The failure was caused by bad remapping.