PDA

View Full Version : Mini One 1.6i MED17.2.2 switch off Valvetronic please help.



WinWoj
4th November, 2017, 01:12 PM
Hi Folks, we have big problem with valvetronic in Mini One 1.6, guys replaced all pats I think, both electrical and mechanical, many cylinderheads, valves and valvetronics jobs done, and we decide to switch valvetronic completely off. Please help.

flash read by boot.

WinWoj
4th November, 2017, 10:24 PM
no any can't help?

WinWoj
8th November, 2017, 08:28 AM
Hello, it looks like after valvetronic position sensor unplug electric motor actuator come back to start position,back 3rd shaft and inlet valves fully opens. Power's back, but check engine light shouts. So delete DTC 2856 and 285A seems to be enought... Has anybody checked solution for MED17.2.2 DTC off? If so, please remove that two.
WBR

Nio
8th November, 2017, 08:37 AM
Hello, did you solve your problem?

Ignasvw
8th November, 2017, 11:24 AM
I attach 2 files with different dtc table switch. Try which one works. Regards
No pass. If i help push thanks and reputation buttons

johak
8th November, 2017, 04:48 PM
another version dtc off

Digital Under
8th November, 2017, 06:57 PM
Bad solution :bs:

...removal DTC - is not solution for shutdown camshafts in any ECU
in MED17.2.2 no switch, but can emulate work camshafts with disconnect regulator and any sensors

WinWoj
8th November, 2017, 07:02 PM
Bad solution :bs:

...removal DTC - is not solution for shutdown camshafts in any ECU
in MED17.2.2 no switch, but can emulate work camshafts with disconnect regulator and any sensorsmate, please tell me the solution, we lost so much money in this car, that i though about burn them...

Ignasvw
8th November, 2017, 10:49 PM
Just try write files with your dtc off. You said that with those dtc everything is good..........

WinWoj
10th November, 2017, 02:21 AM
guys, i tested all your files and there is no results... still the same Dtc's, sensor unpluged of course... please help me in another way. best regards.

vanos batam
10th November, 2017, 02:29 AM
guys, i tested all your files and there is no results... still the same Dtc's, sensor unpluged of course... please help me in another way. best regards.

change DME unit..
faulty from there

WinWoj
10th November, 2017, 02:41 AM
tey change DME unit..
faulty drom thereDo you mean DROM memory? i have one med17 ecu which IC it is? labeled or omething?

vanos batam
10th November, 2017, 09:53 AM
Do you mean DROM memory? i have one med17 ecu which IC it is? labeled or omething?
Replace dme / ecu i mean
sorry for my english

johak
10th November, 2017, 10:18 AM
it is hard to find the right place without damos
if you want to try this
the same pass

WinWoj
10th November, 2017, 02:32 PM
johak, you are the master. after write your file dtc's seems to be cleared, but i used another diagnostic tool (bosh kts) then before, but we test it leter. job done, thanks!

ACmotorsport
17th February, 2018, 01:17 AM
Hello!!! need to , please pass