PDA

View Full Version : volvo v50 1.6d edc16c34 DPF OFF problem



Speedofix
4th November, 2017, 04:17 PM
I have buy DPF OFF file from http://www.dpfoffservice.com/.

have reset dpf Counter With autocom and also try With launch 431 before Write New file.

No fault engine lamp or dtc but stil in limp mode, "egine Power reduced wisit workshop" in Dashboard.

something wrong With dpf off file?

radoslawwiklik
4th November, 2017, 06:39 PM
Your exaust presure sensor disconected? If yes conect.
Additive module have dtc?

voltechcar
4th November, 2017, 06:59 PM
your orginal file is crypted or bad, 511kb? flash must have 2mb

waldi1979
4th November, 2017, 09:55 PM
I have buy DPF OFF file from http://www.dpfoffservice.com/.

This side resembles EcuSoftService (ATR).
Their solutions worked wright on this VOLVO.
I cant check your files because ORI file is corupted.

mario38
5th November, 2017, 07:59 AM
It might work !!
maybe the problem is that you have to disconnect temperature sensor, differential pressure sensor and disconnect additive pump!

Speedofix
5th November, 2017, 10:35 AM
have try to disconnect all sensors not pump.

"reduced engine Power wisit workshop" come in display before i start engine.

no dtc read With skanner.

mario38
5th November, 2017, 02:30 PM
have try to disconnect all sensors not pump.

"reduced engine Power wisit workshop" come in display before i start engine.

no dtc read With skanner.

many dtc have been eliminated .. this is the reason why no errors are being made ..
the buck that yu you bought is not ok ask for help ..

Speedofix
5th November, 2017, 09:43 PM
I have all the time got fault p6620 on glow relay. can that make limpmode `?

carbon7319
5th November, 2017, 09:54 PM
Yes , that is your problem.