PDA

View Full Version : Info to ecu edc15v



jordancar
8th November, 2017, 08:15 AM
Hello, in this car i can not read ecu in obd with fgtech v54, car is Seat Leon 1.9tdi 90hp engine ALH year 2000, fgtech not read .

Inviato dal mio LENNY3 utilizzando Tapatalk

bobolin4o
8th November, 2017, 08:22 AM
Probably is with 2x27C010 in the ECU... only external programmer.
Or is the first one with 29FXXX. MPPS read and vrite OK.

liam987
8th November, 2017, 08:39 AM
Just do the evy mod to your pump mate and wind your turbo actuator in a couple of turns . Normally gives a good gain for free.as those Ecus in the non pd engine normally need de soldering of the chips.

maajkii
8th November, 2017, 08:52 AM
Just do the evy mod to your pump mate and wind your turbo actuator in a couple of turns . Normally gives a good gain for free.as those Ecus in the non pd engine normally need de soldering of the chips.

Not always, few days ago i read ALH 2000y via obd, 29f400


Wysłane z iPhone za pomocą Tapatalk

liam987
8th November, 2017, 09:15 AM
Personally I have never had any success reading a non pd via obd even with dash fuse out.i always go down the evy mod with potentiometer and turn actuator a few turns or put a pd 130 turbo and inlet on it

michaga
8th November, 2017, 01:49 PM
Is that original fgtech? Because chinese clones of galletto 2 don't read edc15 in VAG cars. At least the ones I have tried.

maajkii
8th November, 2017, 02:55 PM
Im shure chinese galletto read And write edc15vm/p with No problem...


Wysłane z iPhone za pomocą Tapatalk

AVDigitale
8th November, 2017, 08:05 PM
i have readed and writen 20 times with fg tech galletto clone china without problem edc15v,edc15p the problem can be with oldest ecu you can try to remove dash fuse or mpps will do good job with this ecu, best regards!

Edgarasz1
8th November, 2017, 08:14 PM
Make sure its edc15 not msa15. I know vw with alh engine ecu not possible to read via obd. Need programmer


Sent from my iPhone using Tapatalk

maajkii
8th November, 2017, 08:15 PM
Make sure its edc15 not msa15. I know vw with alh engine ecu not possible to read via obd. Need programmer


Sent from my iPhone using Tapatalk

What you talking about? I read Passat few times with alh engine..


Wysłane z iPhone za pomocą Tapatalk

dominik.m
8th November, 2017, 08:38 PM
It's simple. Connect any diagnostic tool. See identification ECU. When number is 038906018xx - it's not
possible read & write by OBD!
When number is 038906012xx - You can read & write without problem via OBD.

jordancar
12th November, 2017, 07:00 AM
Ok thank You.

Inviato dal mio LENNY3 utilizzando Tapatalk