PDA

View Full Version : FGTECH EURO v54 (PROPER)



pulsar2000
10th November, 2017, 09:52 AM
Hi anyone know if can still be bought ? years ago i buy one from portugese seller, was very stable tool,
not cp2010 as i tried his mini fgtech and not impressed at all, usual eobd errors on certain ecu, wouldnt trust it on customers car,
im not looking for china board or reworked china pcb,
one i had was proper eu spec clone, any idea where to buy now
i contacted marmes and no luck or reply
thanks

maajkii
10th November, 2017, 10:15 AM
fg is too old tool now....
better to buy Kess 5.017 and Ktag 7.012...

pulsar2000
10th November, 2017, 10:19 AM
I have kess and k tag, good yes
BUT edc16 on Kess very poor. and is cp2010 supplied board,
sometimes only way is set speed to slow,
not a good solution i also have mpps 18
i need stable tool edc15, 16 obd

teamtuner
10th November, 2017, 10:36 AM
I have kess and k tag, good yes
BUT edc16 on Kess very poor. and is cp2010 supplied board,
sometimes only way is set speed to slow,
not a good solution i also have mpps 18
i need stable tool edc15, 16 obd
check your PM mate

voltechcar
10th November, 2017, 11:39 AM
what what????? Kess is poor............ Man I have orginal K-tag and Kess. In the market this device is most stable and professional tool, when he have ecu always do job. Use galetto orginal or magic, than you see what they do job, 20% have bugs.

teamtuner
10th November, 2017, 12:38 PM
what what????? Kess is poor............ Man I have orginal K-tag and Kess. In the market this device is most stable and professional tool, when he have ecu always do job. Use galetto orginal or magic, than you see what they do job, 20% have bugs.
mate...here we talk about cheap tools-clones...the originals are best for who have a lot of work or is friend with ALI-BABA billionaire man

pulsar2000
10th November, 2017, 12:58 PM
to be clear all tools i have are cp2010 tools not cheap sh1t tools from china
and kess is crap tool on edc16 - no idea but not good tool, the fgtech mini same, i dont trust tool,
my old fgtech portugal work always over obd if car on list it would read / write no problem no error ever !

voltechcar
10th November, 2017, 02:57 PM
yeah............ write you clone edc7 to new holland, than we speak for you best tool clone

Ignasvw
10th November, 2017, 03:23 PM
Maajki have eu galleto for sale

OVERSPEED
10th November, 2017, 04:08 PM
My portuguese miniV54 fail in ME7.5 with 28F800...can read, but fails at some point writing..only boot revived after that.

pulsar2000
10th November, 2017, 04:20 PM
yeah............ write you clone edc7 to new holland, than we speak for you best tool clone

you what ? no idea what your saying