PDA

View Full Version : Hyundai SantaFe 2.2CRDI EDC16C39 DPFoff



vopi
11th November, 2017, 09:06 PM
Hi, please, help me with DPFoff on Hyundai Santafe with automatic gearbox and with ECU EDC16C39.

In ECU are these DTCs:
P2002
P1405

thanks for help

bodzio012
11th November, 2017, 11:25 PM
Try and give report

AVDigitale
11th November, 2017, 11:49 PM
dpf off and dtc off chks is ok hit thanks and push reputtation button :peaceful:

vopi
12th November, 2017, 08:27 AM
Hi, thanks for help. The solution is the same and generated by the DPF remover 2017. I tried this but car still has limp mode. I look at swiftec page and there is info about switch solution but for automatic gearbox is necessary to rea full backup by BDM. So for automatic gearbox is switch solution or not? thanks for help

autoSP
12th November, 2017, 12:05 PM
is switch but in different address, u need BDm read. also remember switch solution on these works only if all your sensors are ok and connected

vopi
12th November, 2017, 12:53 PM
is switch but in different address, u need BDm read. also remember switch solution on these works only if all your sensors are ok and connected

I have BDM read! is it possible to make it?
thanks

vopi
12th November, 2017, 07:29 PM
nobody have solution for this car?

maajkii
12th November, 2017, 07:30 PM
contact AEM.....

draganelektricar
12th November, 2017, 09:11 PM
try this solution.
DPF PRESSURE AND TEMPERATURE SENSORS CAN BE DISCONNECTED, LSU SENSORE DISCONNECTED.
PASS.PM