View Full Version : correct checksum edc15m
ivanrojo
12th November, 2017, 08:37 PM
hi all!
could somone please help me with this cheksum? i read eeproms and made the modification, but i hace no way to correct the checksum now.
thanks a lot!
gickmap
12th November, 2017, 08:51 PM
wich tool are you use for read the engine ecu?
ivanrojo
12th November, 2017, 09:28 PM
i desolder eproms and read with minipro
gickmap
12th November, 2017, 10:17 PM
i can try to resolve your problem, but i'm not shure to good result.
gickmap
12th November, 2017, 10:18 PM
i'm sorry, but winols don't correct the chks?
ivanrojo
12th November, 2017, 10:28 PM
yes mine neather
gickmap
12th November, 2017, 10:36 PM
ok but if you do not write at least the eu identifiers, i'm struggling to figure out which ECU to do the chks
ivanrojo
12th November, 2017, 10:38 PM
we need winols 1.5
gickmap
12th November, 2017, 10:45 PM
wich ecu is? hardware and software id? without the information nothing is done
ivanrojo
12th November, 2017, 11:11 PM
edc15m 028100050
queroseno
12th November, 2017, 11:48 PM
As you say, winols 1.5 corrects checksum in that ecu without problems.
ivanrojo
13th November, 2017, 12:04 AM
hi queroseno! problem is a donīt have winols 1.5 and is not possible to run it on win 10
lsdlsd88
13th November, 2017, 09:33 AM
your file is a bad read, check your reader for good connections on the flash chip.
here is a good read. you will see with this file checksum corrector works.
http://www.digital-kaos.co.uk/forums/showthread.php/158092-ULTIMO-exe-(checksum-corrector)
ivanrojo
13th November, 2017, 03:25 PM
maybe I choose a wrong eeprom for reading, chip is an amd but without number, i choose amd 29f010b maybe is other different
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.