need help with VW passat

[Agiukas]

Hi all,
Maybe someone have ori file for this car, vw passat, engine code BMP
Having problems with engine start, its starts up with big vibrations, and it seems some unprofesional work was done with car before it reached me.
HW: 03G906021MS [id by mpps v18, since kess left this spot empty]
SW: 1037399387 [id by kessV2]
SW upg.: 03G997021J 3898 [id by kess]

[furnata]

Do you have Bosch numbers?

[baltazar3]

Hi all,
Maybe someone have ori file for this car, vw passat, engine code BMP
Having problems with engine start, its starts up with big vibrations, and it seems some unprofesional work was done with car before it reached me.
HW: 03G906021MS [id by mpps v18, since kess left this spot empty]
SW: 1037399387 [id by kessV2]
SW upg.: 03G997021J 3898 [id by kess]

Post your OBD read here.
Here is requested files

[SpecZ]

Hi all,
Maybe someone have ori file for this car, vw passat, engine code BMP
Having problems with engine start, its starts up with big vibrations, and it seems some unprofesional work was done with car before it reached me.
HW: 03G906021MS [id by mpps v18, since kess left this spot empty]
SW: 1037399387 [id by kessV2]
SW upg.: 03G997021J 3898 [id by kess]

The important data is SW and code number.

399387 is the one you want.

But nothing like reading the car to see if there is some surprises like someone putting a diferent sw inside..

Good luck!

BR.

Michael

[Agiukas]

adding OBD read

I have suspision that starting fual quanity is increased and also something is messed up with DPF, whn using diagnostic i see negative exchaust temperature.
Sadly I don't have proper skills to find such things in maps yet :/

Update, i wrote ori file posted in this thread, car runs fine, geting no fault codes, if someone could chek file i uploaded and coment it, that would be very nice :)

[lsdlsd88]

your file had dpf off by switch and some dtc off for egr and dpf.

so I suppose your dpf is also empty.

if the filter in car is empty you will have dtc about that with the ori file.

anyway nothing "strange" in the file.
is the engine vibration gone with the ori file???

[Agiukas]

Thanks for the info, seems will upload old file to car,
With ori file cold runs smooth, just geting DPF fault codes, after car warm up, its starts with big vibrations again and vibrates at idle ( same as with its orginal file)
Had suspision for the ecu since inj quanity is "2" but it seems problem not in ECU, thats for help everyone.
Sorry if wasted preciuos time with this case ( I'm just a begginer in this )

[Ignasvw]

Tavo faile išjungtas dpf switch, 2 klaidos ir egr išjungtas ant egr mapu, kas neveikia ant šito ecu. Ant edc15 taip veikia, bet cia edc16 ir reikia per histerizes daryt. Dėl vibracijos pasiziurek purkstukus ,veleneli ir smagrati

[Agiukas]

Tavo faile išjungtas dpf switch, 2 klaidos ir egr išjungtas ant egr mapu, kas neveikia ant šito ecu. Ant edc15 taip veikia, bet cia edc16 ir reikia per histerizes daryt. Dėl vibracijos pasiziurek purkstukus ,veleneli ir smagrati

aciu uz pagalba, purkstukai tikrinti, velenelis geras, smagratis ir ne taip barska, kai kuri silta masina ji uzsikuria su vibracija ir dirba kaip butu per didelis kuro kiekis, kriuksi visa, pergazuoji ir nustoja, seip vaziuoja gerai jokiu problemu, tik kurimasis su vibracija ir tas kriuksejimas. O klijentas nieko nezino nes tik nupirkes masina, tai nznau kas ka jei programavo.

[Ignasvw]

aciu uz pagalba, purkstukai tikrinti, velenelis geras, smagratis ir ne taip barska, kai kuri silta masina ji uzsikuria su vibracija ir dirba kaip butu per didelis kuro kiekis, kriuksi visa, pergazuoji ir nustoja, seip vaziuoja gerai jokiu problemu, tik kurimasis su vibracija ir tas kriuksejimas. O klijentas nieko nezino nes tik nupirkes masina, tai nznau kas ka jei programavo.

Hotstarta padaryk, gal pades be vibracijos uzvesti


Sent from my iPhone using Tapatalk