2016 Nissan Rogue SRS Can't read Infineon XC2336B-40F

[speedcar]

Hello friends.

Can anybody help me to read this infineon MCU XC2336B-40F

I read with UPA USB-S programmer but I am getting "error ID" here

can some body help me to read this mcu Please.

Thanks in advance!!

Note:
UPA- USB S original updated
Connected like the UPA PDF guide
Using external 12V power for the module and external power for the programmer

[audiotek]

I had the same problem with this module, the only way I was able to read the chip was lifting pins 38, 39 and 40.

[SYROB007]

use carprog / airbag/nissan/diag / rogue xc2336 2015+ diag

[speedcar]

I have only UPA-S Original

[speedcar]

I had the same problem with this module, the only way I was able to read the chip was lifting pins 38, 39 and 40.
Did you read with UPA?

[lwood]

Hello friends.

Can anybody help me to read this infineon MCU XC2336B-40F

I read with UPA USB-S programmer but I am getting "error ID" here

can some body help me to read this mcu Please.

Thanks in advance!!

Note:
UPA- USB S original updated
Connected like the UPA PDF guide
Using external 12V power for the module and external power for the programmer


this how i read and write to xc2336B-40F using upa's

[speedcar]

this how i read and write to xc2336B-40F using upa's

works perfect!! What data do I need to read? flash 0 or flash1?

[automotrizVIP]

From clear of crash read flash3 64k

[lwood]

works perfect!! What data do I need to read? flash 0 or flash1?

UPA's chooses it automatic

[speedcar]

I have two options only flash 0 and flash1

[lwood]

I have two options only flash 0 and flash1
in upa's when you choose a chip it will check automatically check the flash for you.. it flash 1. you read and write

[speedcar]

in upa's when you choose a chip it will check automatically check the flash for you.. it flash 1. you read and write
Excellent! could you help me with this dump?

[magneto21]

there u go...
cleared manually
pass in pm

[speedcar]

there u go...
cleared manually
pass in pm

thanks but your pass does not work

[speedcar]

there u go...
cleared manually
pass in pm
Thank you!! I will try and report

[speedcar]

Thank for your time magneto21, works fine!

[javyb]

Does anyone have a wire up to read this airbag unit using points rather then direct to micro please

Sent from my SM-G950F using Tapatalk

[speedcar]

Does anyone have a wire up to read this airbag unit using points rather then direct to micro please

Sent from my SM-G950F using Tapatalk

This works for me, don't forget press thanks!

[ksalamah1]

Hi I used carprog smart obd and was able to read and write the EEPROM without the need to lift any of the legs and was able to read DTCS and clear them but the AIRBAg light still on any help or hints would be great.

[faustoori]

Hi, can you please send again the intruction for reading this ecu with upa?
thanks a lot

[speedcar]

This works for me, don't forget press thanks!

[carloselhalabi]

can you share this picture again please?