Deawoo Matiz i**o off

[easytech]

I need help with i**o off deawoo matiz 0,8L MY2001
Ecu is Siemens SL96.
I have some clock files for renault and peugeot but these doesn't work. This is the ori,

[Meat-Head]

somebody must be able to help this user, it's got to be a genuine post, nobody is going to steal a Matiz are they.

[easytech]

I have found the solution with help of a realtime emulator, and yes nobody wants this car:rolleyes:

If somebody is interested i will post the file.

[dimitar]

Can you please upload it and explain how it works.

[easytech]

Ok try yo explain how I did this. This ecu has a TMS374 and normally you can use TMSdecoder or some other clockfile to reset the code. Somehow this doesn't work with this ecu, if somebody knows? So attached the realtime eprom emulator (I have this from EVC) and you can follow the mcu where the program is executed at the moment. Now usually when you startup de ecu the ecu is 3 times sending aknowledge to the i**o box. If you can find this point in the data with the emulator it is possible to decompile this part of the software and make a jump over this subroutine.
Yesterday it worked on the bench, i will try it in the car today.

[episcop]

I'm have some problem. If it's work, reupload pls...

[ADEL.KSHLAF]

Hello all
Please help im*o off
I've got the same problem:banghead:
Can not log on (im*oBILZER) knowing that a good connection with the (ECU)
Daewoo Matiz - im*obiliser Control Unit P / N: 96322350
Thanks:idea:

http://www.kiparissis.eu/parts/files//919285420.jpg
http://gm.ws123.net/RU/graphic-pool/m/5-/4/m5-4128-16.png
http://gm.ws123.net/RU/graphic-pool/m/5-/4/m5-4128-17.png

[Anmed]

I can help. I need a number of software, written in ECU: one number and three letters, for example 1BWK, 1AFM ... It is suitable ECU Sirius

[ADEL.KSHLAF]

HI :barscarf:
ecu/ part numbers /96291049/ 1BAQ
S010013001E5 / 4U
Flash EPROM /M29F200BB
Thank you my friend:idea:

[Anmed]

How do expect to download the firmware? There is a flasher? Galetto example?
Pins for inclusion on the table:
3 - mass ECU
30 - nondisconnectable +12 V (battery)
29 - switchable +12 V (ignition)
56 - K-Line

[Anmed]

Try it!:wink: :rock:
Must break the link between IMMO and ECU!!! This is important!

If you have an ECU Fenix5 - need to pick gum and read TMS374, I can fix the dump.

[calin_bm]

what pin on ecu is the one with immo line?

[Anmed]

Scheme is slightly higher.:idea:

[calin_bm]

I see 11 and 56,must cut both?

[Anmed]

OMG! At the very beginning of the scheme on the right that say? Warning!
( ) Sirius D3
[ ] Fenix 5MR
And in the scheme, we see:
[11]
(56)
What does this mean? This is a very serious problem, need help the club ... what will be the views?
Just do not be offended, this is a joke

[ADEL.KSHLAF]

All the good lines:idea:
Percentage points to (56) connector And points (11) is not connected Canceled
:wink:
:barscarf: (http://gm.ws123.net/EN/)

[ADEL.KSHLAF]

I see 11 and 56,must cut both?

Thanks for the idea :idea:

[ADEL.KSHLAF]

Hello all
I need help from everyone :giveup:
Can I get the im*o off G dump :heeeelllllooooo:

Thank you for all:stupido:

[benci1982]

I need help with immo off deawoo matiz 0,8L . ecu is siemens D3 1APT 96291050

[lupu_sandu]

I need help with immo off deawoo matiz 0,8L . ecu is siemens D3 1APT 96291050

Use this m8:
http://www.digital-kaos.co.uk/forums/f135/deawoo-matiz-i-o-off-62743/#post599245

[benci1982]

Use this m8:
http://www.digital-kaos.co.uk/forums/f135/deawoo-matiz-i-o-off-62743/#post599245

hi.ve tried but it does not work :(

[benci1982]

someone help???????

[calin_bm]

any result with the matiz? did you start it?

[dashtec]

HAVE MATIZ ON 2008 IMMO PROBLEM, NEED IMMO OFF, I BELIEVE ECU SIMILAR TO USED IN FRENCH CARS,

EEPROM AM29F400BB

ECU DETAIL

D42 3BPB
SWY5451B 96801808 9J
5451B180091509/010

ALSO WHT IMMO WIRES NEED CUTTING

[dimitar]

Try it!:wink: :rock:
Must break the link between IMMO and ECU!!! This is important!

If you have an ECU Fenix5 - need to pick gum and read TMS374, I can fix the dump.


doesnt work